Bedienungsanleitung Vonroc PH501AC - Albano (Seite 6 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

764173

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

WWW.VONROC.COM

matches the device.

• Check that the carabiners close properly and

that the device hangs immovably. It must not be

able to slide, drop, slide or the like! Only operate

the heater when it is in the upright position.

Assembling the remote control (Fig. B)

• Flip the remote control (8) to the backside and

remove the battery cover.

• Insert 2 AAA/ Alkaline type batteries into the

remote control (8) in accordance with the

instructions and polarity of the batteries..

• Change the batteries in the same way depicted

above.

4. OPERATION

Switching on/off (Fig. A, B)

The heater can be turned on and off using the re-

mote control (8) only. Before use, the power switch

(5) on the heater must ﬁrst be turned on. Without

a remote control, the heater cannot be operated. If

you do not have the remote control in your posses-

sion, please contact Vonroc customer service.

• First turn the switch (5) on the heater to the

‘ON’ position.

• Press the button (9) on the remote control (8) to

turn the heater on.

• To turn the heater off, again press the button (9)

on the remote control (8).

• Press the switch (5) on the heater to the ‘OFF’

position to power off.

Note: Make sure to point the remote control (8) in

the direction of the remote control receiver (10). All

VONROC heaters and their remote controls use the

same frequency, so it is possible to control several

heaters with just one remote.

5. MAINTENANCE

Always make sure that the machine is not

connected to the mains electricity when you

carry out any maintenance of the mechanism.

CAUTION: Risk of Electric Shock. DO NOT

open or try to repair the heater yourself.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and dirt.

Re-move very persistent dirt using a soft cloth moi-

stened with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

• DO NOT use alcohol, gasoline, abrasive pow-

ders, furniture polish or rough brushes to clean

the heater. This may cause damage or deteri-

oration to the surface of the heater.

• DO NOT immerse the heater in water

• Wait until the heater is completely dry before

use.

ATTENTION:

• Always disconnect the heater from the electrici-

ty supply and allow it to cool before attempting

to clean it.

• If the heater has collected dust or dirt inside

the unit or around the heating element, have to

unit cleaned by a qualiﬁed service agent. Do not

operate the heater in this condition.

• The only maintenance required is cleaning of

the external surfaces of the heater.

• Do not touch the heating element with bare

ﬁngers, as residue from your hand could affect

the life of the lamp. If it is accidentally touched,

remove the ﬁnger marks with a soft cloth moi-

stened with mentholated spirit or alcohol.

• Do not attempt to repair or adjust any electrical

or mechanical functions on this heater.

• The heater contains no user serviceable parts.

Should the product suffer damage or break-

down, it must be returned to the manufacturer

or its service agent.

• Damaged supply cords to be replaced by the

manufacturer, service agent or similarly quali-

ﬁed person in order to avoid hazard.

Storage

Store the heater in a cool, dry location when not

in use to prevent dust and dirt build up. Use pack-

aging carton to store.

Trouble Shooting

If the heater will not operate, please check the

following before seeking repair or service:

• Check if the power cord is plugged into an

electrical outlet, if not plug in.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc PH501AC - Albano Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info