Bedienungsanleitung Webasto Live (Seite 28 von 79) (Deutsch, Englisch, Holländisch, Italienisch, Spanisch)

802116

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

16 5110326C_OI-II_Webasto Live

3.1.3 SIM cardslot for modem

If it is necessary to change the GSM provider, then the

SIM card can be removed from the SIM card slot (pull

out, not automatically ejected by a spring) and an altern-

ative SIM card can be inserted. Prerequisites for using a

SIM card:

– Form factor 3FF (micro SIM)

– Service M2M without PIN, provider enabled

3.1.4 LAN

For connecting the charging station to the network infra-

structure at the installation location. The charging station

can be configured and controlled using this connection

(prerequisite: connection to the back end or to the local

power management system). A category 5e network

cable or higher is recommended.

3.1.5 USB type B

Connecting in slave mode for making a USB connection

to a computer for the configuration. When connected to

a computer, this USB connection functions like a network

interface, and is used to open the web configuration in-

terface.

(see online configuration instructions: https://webasto-

charging.com/documentation).

3.1.6 WLAN

After completing the start process of the charging sta-

tion, you have the option to connect a WLAN-enabled

computer or mobile device to the charging station hot-

spot (see online configuration instructions: https://

webasto-charging.com/documentation)

Only the configuration interface can be opened using the

established connection.

3.1.7 Control cable (Control Pilot)

Fig.3

Legend

Modbus

CP connection (push-in terminal)

There also is a data line in the charging cable together

with the power supply lines and is known as a CP (control

pilot) line. This line (black-white) is inserted into the push-

in terminal on the CP connection . This applies to in-

stalling the original charging cable and also to replacing

the charging cable.

3.2 Description of power supply interface

connections

Fig.4

The connections of the mains cable are marked with

"IN". The 5 terminals on the left have L1/L2/L3/N/PE prin-

ted on them

The connections of the charging cable are marked with

"OUT". The 5 terminals on the right have PE/N/L1/L2/L3

printed on them

NOTE

To release the power supply connections, use an insu-

lated flat-head screwdriver by inserting it into the

opening for this purpose immediately above push-in

terminal.

All dimensions specified in mm.

3.3 Electricity meter

With the integrated MID-compliant power meter, it is

possible to measure power consumption by loading with

the Webasto Live. The calibration date for the power

meter can be found on the type plate on the charging

station, below the CE mark. When using the power

meter, pay careful attention to the country-specific legal

calibration stipulation.

4Scope of delivery

Scope of delivery Amount

Charging station 1

Charging cable with charging coupling 1

RFID dongle 2

Installation kit for wall mounting

–Wall plug (8 x 50 mm, Fischer UXR8) 4

–Screw (6 x 70, T25) 2

Scope of delivery Amount

–Screw (6 x 90, T25) 2

–Washer (12 x 6.4 mm, DIN 125-A2) 4

–Screw (3 x 20 mm, T10) 2

–Mounting bracket 1

–Cable bushing, (one is custom-made) 2

Installation kit for charging cable:

–Spiral antikink protection 1

–Cable tie 1

–Strain relief clamp 1

–Screw (6.5x25mm, T25) for fastening

the strain relief clamp 2

Operating and installation instructions 1

5Required tools

Tool description Amount

Slot-head screwdriver 0.5x3.5mm 1

Torx screwdriver Tx25 1

Torx screwdriver Tx10 1

Torque wrench (range covers 5-6Nm, for

Tx25)

Torque wrench (range covers 4-5Nm, for

open-ended spanner size 29)

Drilling machine with 8 mm drill 1

Hammer 1

Measuring tape 1

Spirit level 1

Wire stripping tool 1

Installation tester 1

EV simulator with rotary field display 1

Round file 1

Combination pliers 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Webasto Live Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Webasto Live

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info