724638
10
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
220W 3-in-1 Multi Purpose Sander
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL No.: S1B-DW01-220W • 09/2018 • 61865
(toll free)
AFTER SALES SUPPORT
(toll free)
220W 3-in-1 Multi Purpose Sander
e-mail: help@powertoolsupport.com1800 909 909
MODEL No.: S1B-DW01-220W • 09/2018 • 61865
16 17
Attaching sanding sheets without using Velcro
NOTE: Make sure the holes on the sandpaper are aligned with the holes on
the sander base plate. This ensures maximum dust removal and allows air
ow from the motor.
1. Open the two clamping levers (8) (Fig L).
2. Push the sanding sheet under the open clamping rail (10) at one end and
clamp it rmly in place with the clamping lever (8) (Fig M).
3. Follow the same procedure at the other end of the sander to secure the
other end of the sanding sheet.
Dust extraction
WARNING! RISK OF FIRE!
When working with power tools that have a dust collection box or
can be connected to a vacuum cleaner via an adaptor, there is a risk
or re! In unfavourable conditions, e.g. when sparks are ying while sanding
metal or metal residues in wood, wood dust in the dust bag (or in the bag
of the vacuum cleaner) can spontaneously ignite. This is a particular risk
if the wood dust is mixed with paint residues or other chemicals and the
workpiece has become hot after being worked for a long time. Therefore,
do not allow the workpiece to overheat and always empty the dust box or
the dust bag of the vacuum cleaner before taking a break from work.
NOTE: Always wear a dust mask.
NOTE: Perforated sanding sheets are required for dust extraction i.e with
holes in the sandpaper
Preparation Preparation
Fitting the Dust collection box
WARNING! Always remove the plug from the mains power socket
before carrying out any work on the sander.
1. To connect the dust collection box (6) simply push it onto the adaptor
tting port (2) as far as it will go (Fig N). You will hear a click when the
release button for dust box (7) engages with the adaptor tting port (2).
2. To remove the dust collection box (6) press the release button for dust
box (7) and pull it o backwards from the adaptor tting port (2).
NOTE: To achieve optimum dust extraction, clean the dust collection box
(6) regularly. Refer to the maintenance section for further detail.
Using the Reducer for external extraction appliances
WARNING! Always remove the plug from the mains power socket
before carrying out any work on the sander.
Connecting the Reducer for external extraction appliances
1. Push the reducer for external extraction appliance (3) into the adaptor
tting port (2) until it is secure (Fig O).
2. Push the hose of a suitable workshop vacuum cleaning or dust extraction
machine / onto the reducer for external extraction appliance (3) (Fig P).
NOTE: The reducer for external extraction appliance (3) will t the
majority of dust extraction / vacuum appliances.
3. To remove the reducer for external extraction appliance (3), rstly
disconnect the hose of the vacuum cleaner / dust extraction appliance
from the reducer for external extraction appliance (3).
4. Remove the reducer for external extraction appliance (3) from the
adaptor tting port (2).
L.
N. O. P.
M.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Workzone S1B-DW01 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info