3.4.1 Sport mode includes outdoor walking, indoor walking, outdoor running, indoor
running, cycling, hiking and swimming. This Activity Tracker is not equipped with GPS,
therefore the results of some sport modes that require A-GPS support may vary with
different phones.
3.4.2 Click the icon to enter the corresponding sport mode and customize the goal of the
day (distance, time or calories) or set no goals. The Activity Tracker will automatically
save the setting, and will apply it the next time that sport mode is used.
3.4.3 Historical data: It saves the last 8 records. The records will be displayed in chronological
order and can be viewed by sliding up and down.
Note: The data will only be saved when the exercise time is more than 5 minutes or more
than 200 steps. Either one of these conditions will activate the recording function, otherwise
the recording function will not start due to insufficient data.
3.4.4 When you start recording the data, the tracker screen will display the following content:
type of sport and start time. You can swipe up and down to see the detailed records.
The data will vary according to the type of sport.
3.4.5 Goal completion: The Activity Tracker will display ‘Goal completed’ when the pre-set
goal is accomplished. Moreover, the record function will keep recording if the exercise
continues.
3.5 Sleep Monitor
The default sleep monitor starts at 21:00 pm and ends at 7:30 am the next day. If the tracker
is worn while sleeping, you can check the sleep time on the watch in the following morning.
If the Activity Tracker is paired with the phone, the sleep data will be synchronized
automatically (or manually) with the Xplora APP.
Note: The Activity Tracker is able to automatically identify if you are asleep. There may be
differences between the detected data and the actual data because the watch may still be
under the detection process. The watch will display the detected result of the whole night,
which will be identical with the actual sleep data, once it finishes the monitoring. There may
be some deviation with the actual sleeping status due to the change in different sleep modes.
3.6 Health
3.6.1 Heart rate: The display will show "--Bpm". Two seconds later the heart rate test begins.
The data will be displayed on the tracker screen when the heart rate data is detected
and the detection will be carried out continuously. If you want to stop the detection,
swipe right to exit and return to the previous screen. In the APP, you can check the
