Bedienungsanleitung Yamaha 01V (Seite 289 von 308) (Deutsch)

517044

289

Zoom out

Zoom in

Vorherige Seite

1/308

Nächste Seite

288 MIDI-Datenformat

01V—Bedienungsanleitung

PARAMETER CHANGE (7bit operation for type

0x10:edit buffer)

Reception

This message is received if [Parameter Change RX] is ON and the [Rx

CH] matches the Device Channel included in the SUB STATUS.

This is echoed if [Parameter Change ECHO] is ON.

When this is received, the speciﬁed parameter will be controlled.

Transmission

If [Parameter Change TX] is ON, this message is transmitted on the

[Tx CH] Device Channel when a parameter not speciﬁed in the

[Control Assign Table] is modiﬁed.

The valid range of addresses is 0x0000 - 0x03FF

PARAMETER CHANGE (bit operation for type

0x40:edit buffer)

Reception

When [Parameter Change RX] is ON, this message is received if the

[Rx CH] matches the Device Channel included in the SUB STATUS.

If [Parameter Change ECHO] is ON, this message will be echoed.

When this message is received, the speciﬁed parameter will be con-

trolled.

Transmission

If [Parameter Change TX] is ON, this message is transmitted on the

[Tx CH] Device Channel when a parameter not speciﬁed in the

[Control Assign Table] is modiﬁed.

The valid range of addresses is 0x0000 - 0x03FF

PARAMETER CHANGE (byte operation for type

0x01:system memory)

Reception

When [Parameter Change RX] is ON, this message is received if the

[Rx CH] matches the Device Channel included in the SUB STATUS.

When [Parameter Change ECHO] is ON, this is echoed.

When this is received, the speciﬁed parameter will be controlled.

The system memory will depend on the address, as follows.

PARAMETER CHANGE (bit operation for type

0x41:system memory)

Reception

When [Parameter Change RX] is ON, this message is received if the

[Rx CH] matches the Device Channel included in the SUB STATUS.

When [Parameter Change ECHO] is ON, this is echoed.

When this is received, the speciﬁed parameter will be controlled.

The system memory will depend on the address, as follows.

STATUS 11110000 F0 System Exclusive Message

ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)

SUB STATUS 0001nnnn 1n parameter change n=0-15(Device Chan-

nel No.1-16)

GROUOP ID 00111110 3e MODEL ID

MODEL ID 00000100 04 Device code (01V)

PARAM TYPE 00010000 10 7bit operation for edit buffer (type)

DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address

0aaaaaaa dd1 address( L) low 7 bits of 14 bits address

0ddddddd dd2 data 7bit

: :

EOX 11110111 F7 End Of Exclusive

STATUS 11110000 F0 System Exclusive Message

ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)

SUB STATUS 0001nnnn 1n parameter change n=0-15(Device Chan-

nel No.1-16)

GROUOP ID 00111110 3e MODEL ID

MODEL ID 00000100 04 Device code (01V)

PARAM TYPE 01000000 40 bit operation for edit buffer (type)

DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address

0aaaaaaa dd1 address( L) low 7 bits of 14 bits address

0ddddddd dd2 data(bit0-2:change bit no.0-7, bit3:0=reset

1=set)

: :

EOX 11110111 F7 End Of Exclusive

STATUS 11110000 F0 System Exclusive Message

ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)

SUB STATUS 0001nnnn 1n parameter change or response

n=0-15(Device Channel No.1-16)

GROUOP ID 00111110 3e MODEL ID

MODEL ID 00000100 04 Device code (01V)

PARAM TYPE 00000001 01 byte operation for system memory (type)

DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address

0aaaaaaa dd1 address( L) low 7 bits of 14 bits address

0000dddd dd2 data( H) high 4 bits of 8 bits data

0000dddd dd3 data( L) low 4 bits of 8 bits data

: : continuous address datas

EOX 11110111 F7 End Of Exclusive

0x0000 - 0x007F : setup memory(128byte)

0x0080 - 0x0147 : backup memory(200byte)

0x0200 : card type(1byte)

STATUS 11110000 F0 System Exclusive Message

ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)

SUB STATUS 0001nnnn 1n parameter change or response

n=0-15(Device Channel No.1-16)

GROUOP ID 00111110 3e MODEL ID

MODEL ID 00000100 04 Device code (01V)

PARAM TYPE 01000001 41 bit operation for system memory (type)

DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address

0aaaaaaa dd1 address( L) low 7 bits of 14 bits address

0ddddddd dd2 data(bit0-2:change bit no.0-7, bit3:0=reset

1=set)

: :

EOX 11110111 F7 End Of Exclusive

0x0000 - 0x007F : setup memory(128byte)

0x0080 - 0x0147 : backup memory(200byte)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01V Seite 289

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 01V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info