Bedienungsanleitung Yamaha CP40 STAGE (Seite 30 von 60) (Englisch)

588665

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

30 CP4 STAGE/CP40 STAGE Owner’s Manual

Quick Start Guide

Storing Settings

[STORE] button

Of the settings we have made so far,

• Part on/off status;

• Changes to Voices;

• Metronome time signature, tempo, and volume; and

• Parameter levels adjusted using the Part sliders

in addition to

• Effect on/off statuses set using the [CHORUS] and

[REVERB] SYSTEM EFFECT buttons and [A] and [B]

PART EFFECT buttons (page 34)

can be stored as part of a Performance (page 21). Stored

settings will be maintained when the stage piano is

turned off.

The following procedure shows how to store your settings

in the instrument’s first Performance (No. 001):

NOTICE

The Performance selected as the destination for storing in

the following procedure will be overwritten and all of its data

will be replaced.

Press [STORE]; press [ENTER]; press [+1/YES] when

asked “Are you sure?”.

Press [-1/NO] if you do not wish to proceed.

NOTE

• For more details regarding storing, refer to Storing a Performance

(page 34).

• The setting made using the [-] and [+] TRANSPOSE button and

the on/off status of the [MASTER COMP] button can be stored by

first pressing the [UTILITY] button and then the [STORE] button.

• Gain adjustments made using the MASTER EQ sliders and the

on/off status of the [PANEL LOCK] button cannot be stored.

Selecting a Performance

When you turn on the instrument in its default condition,

the first Performance (No. 001) will be loaded. Why not

take a moment now to select and play other

Performances using the following procedure:

1 Press the [PERFORMANCE PLAY/SELECT]

button.

The Performance Select screen will be displayed and

the button will start to flash.

Performance Select screen

NOTE The Parts currently turned on are shown at the right of

the screen. The cursor indicates the Part whose Voice is

currently selected for editing.

2 Select a different Performance using the

[-1/NO] and [+1/YES] buttons or the Data Dial.

The selected Performance will be displayed on-

screen.

NOTE

• A full list of your stage piano’s Performances can be found in

the Data List (pdf).

• On the CP4 STAGE, Performances are arranged into groups

of 16; on the CP40 STAGE, each group contains eight

Performances. To skip between different groups on the

Performance Select screen, use the [-1/NO] and [+1/YES]

buttons or the Data Dial with the [SHIFT] button held down.

• By pressing a Voice Category button (from the bottom row in

the case of the CP40 STAGE) with the [SHIFT] button held

down, you can select the corresponding Performance from

the current group.

3 Play the keyboard to hear how the selected

Voice sounds.

PERFORMANCE SELECT

R001(A01):

CFX Grand

Performance

number

Performance

name

Part name

(on-screen

abbreviation)

M: MAIN Part

L: LAYER Part

S: SPLIT Part

PERFORMANCE SELECT

R004(A04):

S6+Pad 1

RML

Group

Number

within group

Selected

Part

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CP40 STAGE Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP40 STAGE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info