Bedienungsanleitung Yamaha CP40 STAGE (Seite 31 von 60) (Englisch)

588665

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

CP4 STAGE/CP40 STAGE Owner’s Manual 31

Quick Start Guide

4 When you are happy with your selection,

press the [PERFORMANCE PLAY/SELECT]

button or the [EXIT] button to return to the

Performance screen.

The name of the Performance and the Voice assigned

to its active Part(s) will be displayed.

NOTE If you make a change to a Performance with a Voice

Category button, the [LAYER] button, or the [SPLIT]

button while on the Performance Select screen, the

Performance screen will be restored.

Creating Your Own

Performances

As described below, two editing areas are used to create

original Performances: the Performance Common Edit

area is used to edit parameters that affect all Parts; the

Performance Part Edit area is used to edit parameters for

individual Parts.

NOTE Refer to the Reference Manual (pdf) for details on each

area’s parameters.

Setting chorus and reverb effects

Your stage piano’s system effects — that is, chorus and

reverb — can be configured for each Performance. As an

example of setting parameters in the Performance

Common Edit area, the following procedure describes

how to configure these effects for the currently selected

Performance:

1 Press the [EDIT] button.

The Edit menu will be displayed.

2 Use the [u] button to select 01: Common,

and then press the [ENTER] button.

The Common Edit menu will be displayed.

3 Use the [u] button to select

01: Chorus Effect, and then press the

[ENTER] button.

The Chorus Effect screen will be displayed.

4 Use the [l] and [r] buttons and the Data

Dial to select a category and a type for the

chorus effect.

Tip

Changing Performances directly using the

Voice Category buttons

If you press the [PERFORMANCE PLAY/SELECT]

button with the [SHIFT] button held down, the

message “PERFORMANCE DIRECT SELECT” will

appear at the top left of the screen.

If you now press a Voice Category button, the

corresponding Performance from the current group

will be directly selected. If you again press the

[PERFORMANCE PLAY/SELECT] button with the

[SHIFT] button held down, the Performance Select

screen will return to normal.

Pressing the [LAYER] or [SPLIT] button while

“PERFORMANCE DIRECT SELECT” is displayed will

not restore the Performance screen, making this mode

highly useful when performing live.

Tip

Changing Performances using a foot switch

With an FC4 or FC5 Foot Switch connected via the

[ASSIGNABLE] FOOT SWITCH jack, you can make

the following setting in order to change the current

Performance using the foot switch.

Press [UTILITY]; select 03: Controller; press [ENTER];

set FS (Foot Switch Control Number) to “99 (PC Inc)”

or “100 (PC Dec)”.

MAIN:A.PIANO1

01:CFX

PERFORMANCE DIRECT SE

R004(A04):

LECT RML

S6+Pad 1

EDIT

D01:Common

EDIT Common

D01:Chorus Effect

Common Ctg T

Chorus Eff CHOR SPX

ype Preset E

Cho Basic D

Effect category Effect type

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CP40 STAGE Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP40 STAGE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info