Bedienungsanleitung Yamaha CP40 STAGE (Seite 35 von 60) (Englisch)

588665

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

CP4 STAGE/CP40 STAGE Owner’s Manual 35

Quick Start Guide

Recording Your Playing as

Audio

Using the stage piano’s recording function as described

below, you can record what you play on the keyboard as

an audio (Wave) file on the connected USB flash-memory

device. Audio files saved in this way will have a .WAV file

extension.

1 Plug a USB flash-memory device into the

[TO DEVICE] USB terminal on the rear panel.

2 Press the [I] (Record) button.

The light above the button will start to flash, indicating

that the stage piano is in Recording Standby mode.

The first pane of the Audio Recording screen will be

displayed, and a file name will be automatically

assigned.

NOTE

• Recording Standby mode can be cancelled by pressing the

[J] (Stop) button.

• Screen operations and parameter editing are possible while in

Recording Standby mode.

3 If necessary, change the file name. Ensure

that the cursor (R) is located at the Name

parameter, and then press the [ENTER]

button.

4 When you have set the required name, press

the [ENTER] button to proceed.

The first pane of the Audio Recording screen will

again be displayed.

For details on how to set a name, refer to Entering text

(page 20) from the Basic Operations & Display

Content section.

IMPORTANT

Audio files created by your stage piano will have “}{” as

their seventh and eight characters. Recorded audio is

quieter than that produced by the keyboard, and these

characters tell the instrument to increase the playback

volume in order to maintain a suitable balance.

Accordingly, these characters should not be removed.

5 If necessary, use the [d] button to move to

the screen’s other panes and set the tempo,

time signature, click sound, and other

metronome parameters for recording.

Move the cursor (R) to any parameter you wish to

modify using the [l] and [r] buttons, and then

change the setting using the [-1/NO] and [+1/YES]

buttons or the Data Dial.

NOTE

• Although the metronome will normally start to play

automatically at the beginning of recording, its sound will not

be recorded. If you do not need the metronome to start

automatically in this way, set the AutoClk parameter to “off”. In

addition, you can also toggle the metronome on and off while

recording using the [METRONOME] button.

• The Te mpo, Beat (time signature), and ClickVol parameters

can also be set on the General screen from the Performance

Common Edit area; the PreCount and AutoClk parameters can

also be set on the General screen from the Utility area. For

more details on these parameters, refer to the Reference

Manual (pdf).

Tip

Audio files

Recording the actual sound of what you play, audio

files store audio data in much the same way as a

cassette tape or digital voice recorder. They can be

played back on portable audio players and many

other types of device, making it easy for you to let

others hear what you have played.

AUDIO

REC [

File Name

WAV001}{] R[ENTER] D

File name

AUDIO

REC

Name

[WAV001}{]

AUDIO Metronome

REC

Tempo Beat

R 90 4/ 4 W

AUDIO

REC

PreCount AutoClk

R1meas on U

AUDIO Metronome

REC

ClickVol

R100 W

Press the [d] button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CP40 STAGE Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP40 STAGE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info