Bedienungsanleitung Yamaha CS1X (Seite 30 von 64) (Englisch)

48730

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

■ ASSIGN2

This sets the control parameter and knob sensitivity of the

ASSIGN 2 Sound Control Knob. It is possible to assign up to four

parameters from 28 types. It is also possible to set the sensitivity

(control range of the knob) for each parameter.

The parameter assigned to the ASSIGN2 knob as the default

differs depending on the Performance selected.

1. Select the Layer.

Press the LAYER [-]/[+] button to select the Layer to which you

want to assign a parameter.

2. Select the item (parameter type or sensitivity) you want

to edit and the assignment number which you want to

assign the parameter to.

Press the Parameter Value [UP] button to select the item

(parameter type or sensitivity) you want to edit, and the

assignment number. Each time you press the (PARAM)

Parameter Value [UP] button, the arrow cursor will move as

shown in the following illustration.

Each time you press the (PARAM) Parameter [DOWN] button, the

arrow cursor will move in the opposite direction.

3. Move the cursor to the Parameter type area and press

the (DATA) Parameter UP/DOWN button to select the

parameter type.

Settings:

The following parameters can be assigned to assignment

number 1 ~ 4. For details about each parameter, see the

reference pages as listed below.

When voices are not assigned to the Layers (Bank=Off),

Parameter type and sensitivity will not display.

NOTE

▲▼

Parameter type of assignment number 1 ↓

↓

↑

Sensitivity of assignment number 1 ↑

Parameter type of assignment number 2 ↑

Sensitivity of assignment number 2 ↑

Parameter type of assignment number 3 ↑

Sensitivity of assignment number 3 ↑

Parameter type of assignment number 4 ↑

Sensitivity of assignment number 4 ↑

Parameter Type

Layer

Assignment Number

Sensitivity

Parameter with an asterisk cannot be modified, but you can assign it to

the ASSIGN2 knob.

Each parameter can also be selected by inputting the number with the

numeric keypad.

4. Press the (PARAM) Parameter Value UP/DOWN button to

move the arrow cursor to the sensitivity area.

5. Press the (DATA) Parameter Value UP/DOWN button to

set the knob sensitivity.

Settings:

Parameters can be set between -32 and +32, for assignment

numbers 1 ~ 4.

As an example, say you have selected the Volume

parameter and set the knob sensitivity to the positive value "+32". The

volume is "0" when the knob is turned counter-clockwise to the far

left, and "127" when the knob is turned clockwise to the far right.

If the knob sensitivity is set to the negative value "-32", the volume is

"127" when the knob is turned to the far left and "0" when the knob is

turned to the far right. If the sensitivity value is small, the control range

of the knob will be narrowed and limited.

6. Repeat the above steps to set a different parameter/knob

sensitivity value to each of the four assignment numbers.

When the PARAM screen is displayed, you can select the

parameter type or change the sensivity using the Data Entry knob or

the numeric keypad.

NOTE

# LCD

0 off

1 Volume (page 33)

2 NoteShift (page 27)

3 Detune (page 27)

4 Pan (page 34)

5 ChorusSend (page 38)

6 ReverbSend (page 38)

7 *Pitch (Oscillator Pitch)

8 VelSnsDpth (Velocity Sensitivity Depth) (page 28)

9 VelSnsOfst (Velocity Sensitivity Offset) (page 28)

10 Cutoff (Filter Cuttoff Frequency) (page 34)

11 Resonance (page 34)

12 AEGAtkTime (AEG Attack Time) (page 30)

13 AEGDcyTime (AEG Decay Time) (page 30)

14 AEGSusLvl (AEG Sustain Level) (page 30)

15 AEGRelTime (AEG Release Time) (page 30)

16 LFOSpeed (LFO Speed) (page 31)

17 LFOAMod (LFO Amplitude Modulation Depth) (page 30)

18 LFOPMod (LFO Pitch Modulation Depth) (page 30)

19 LFOFMod (LFO Filter Modulation Depth) (page 31)

20 FEGAtkTime (FEG Attack Time) (page 32)

21 FEGDcyTime (FEG Decay Time) (page 32)

22 FEGSusLvl (FEG Sustain Level) (page 32)

23 FEGRelTime (FEG Release Time) (page 32)

24 PEGInitLvl (PEG Initial Level) (page 32)

25 PEGAtkTime (PEG Attack Time) (page 32)

26 PEGAtkLvl (PEG Attack Level) (page 32)

27 PEGDcyTime (PEG Decay Time) (page 32)

28 PEGRelTime (PEG Release Time) (page 32)

29 PEGRelLvl (PEG Release Level) (page 32)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS1X Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info