Bedienungsanleitung Yamaha CS2X (Seite 75 von 84) (Englisch)

48728

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Appendix

2. SYSTEM MESSAGES

System messages are the data related to the overall system of the device.

2.1 System Exclusive Messages

System Exclusive messages control various functions of the CS2x,

including master volume and master tuning, tone generator mode,

effect type and various other parameters.

2.1.1 General MIDI Mode On

When General MIDI mode on is received, the tone generator mode

will be changed to XG mode.

When this happens, the CS2x will receive the MIDI messages

which are compatible with GM System Level 1, and consequently

will not receive NRPN and Bank Select messages.

Since approximately 50ms is required to execute this message, be

sure to leave an appropriate interval before the subsequent

message.

F0 7E 7F 09 01 F7 (Hexadecimal)

2.1.2 Master Volume

When received, the Volume MSB will be effective for the System

Parameter.

F0 7F 7F 04 01 ll mm F7 (Hexadecimal)

* mm(MSB) = appropriate volume value, ll(LSB) = ignored

2.1.3 XG System On

When this data is received, the CS2x will switch to XG mode and

all the parameters will be initialized accordingly, and XG-

compatible messages such as NRPN and Bank Select messages can

be received.

Since approximately 50ms is required to execute this message, be

sure to leave an appropriate interval before the subsequent

message.

F0 43 1n 4C 00 00 7E 00 F7 (Hexadecimal)

*n = device number

TG300B Reset

F0 41 1n 42 12 40 00 7F 00 41 F7 (Hexadecimal)

*n = device number

2.1.4 Performance Mode On

F0 43 1n 63 50 00 06 03 F7 (Hexadecimal)

*n = device number

2.2 Active Sensing

Once FE (Active Sensing) has been received, if no MIDI data is

subsequently received for longer than an interval of approximately

300msec, the CS2x will perform the same function as when All Sounds

Off, All Notes Off, and Reset All Controllers messages are received, and

will then return to a status in which FE is not monitored.

Refer to the MIDI Data Format in the “Data List” book for more

information on the various messages.

1.2.24.2 Reset All Controllers (Control #121)

The values of the following controllers will be reset to the

defaults.

1.2.24.3 All Notes Off (Control #123)

Clears all notes currently on for the specified channel.

However, if Hold1 or Sostenuto is on, notes will continue

sounding until these are turned off.

1.2.24.4 Mono (Control #126)

Performs the same function as when an All Sounds Off message

is received, and if the 3rd byte (mono number) is in the range

of 0 - 16, sets the corresponding channel to Mono Mode (Mode

4 : m = 1).

1.2.24.5 Poly (Control #127)

Performs the same function as when an All Sounds Off message

is received, and sets the corresponding channel to Poly Mode

(Mode 3).

1.3 Program Change

Messages which determine which voice to select for each Part.

With a combination of Bank Select, you can select not only basic voice

numbers, but also variation voice bank numbers.

1.4 Channel Aftertouch

Messages which let you control the sounds by the pressure you apply to

the keys after the initial striking of the keys, over the entire channel.

1.5 Polyphonic Key Pressure

Messages which let you control the sounds by the pressure you apply to

the keys after the initial striking of the keys, for each individual key.

1.6 Pitch Bend

Pitch Bend messages are continuous controller messages that allow the

pitch of designated notes to be raised or lowered by a specified amount

over a specified duration.

CONTROLLER VALUE

Pitch Bend Change 0 (center)

Aftertouch 0 (off)

Modulation 0 (off)

Foot Controller 0 (min)

Expression 127 (max)

Hold1 0 (off)

Portamento 0 (off)*

Sostenuto 0 (off)

Soft Pedal 0 (off)

Portamento Control Cancels the Portamento source key number

RPN Number not specified; internal data will not change

NRPN

* In Performance mode, 1 (on).

Number not specified; internal data will not change

cCS2x_App 12/10/98 5:15 PM Page 75

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS2X Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS2X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info