Bedienungsanleitung Yamaha MOTIF ES7 (Seite 118 von 300) (Englisch)

571272

118

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Creating a Song on the MOTIF ES

118 Owner’s Manual

Quick Guide — Advanced Course

Recording with the keyboard to a Song

track (in the Song Record mode)

■ Recording your keyboard performance to an

empty track (Replace)

Use the Replace recording method to record your keyboard

performance to an empty track or overwriting an already

recorded track with new data.

You can make changes to the Voice settings after entering the

Record mode (in step #3 below). However, if you intend to make

detailed settings to the Mixing parameters, you should do so

before enabling recording.

Song data is made up of three different types — Scene, Tempo and

Pattern — each of which have their own separate tracks. The Scene

track contains Song Scene (page 123) changes and the Tempo track

contains playback tempo changes. The Song tracks (1 - 16) contain

the actual note data. Since you’ll be recording a melody with the

keyboard, select one of the number tracks, using the [1] - [16] buttons.

nWhen the RecTrack is set to “multi,” you can simultaneously record

multiple channels of MIDI data (up to 16 channels) to all 16 tracks.

For details, see page 143.

Set the Type parameter to “replace.”

Set other parameters as necessary. See page 222 for details.

Call up the display for setting a Voice by pressing the [F2]

VOICE button. You won’t need to make settings in this display

if you’ve already completed Voice/Mixing settings in step #2

above.

nNon-note settings (such as Voice, volume and pan) that are made at

the beginning of a Song are not recorded as MIDI sequence data but

rather as Mixing setup data. However, when these non-note settings

are recorded in the middle of a Song, they are recorded as part of the

MIDI sequence data.

Listen to the playback of the already recorded tracks and play

(record) the keyboard along with them.

This operation exits from the Song Record mode to the Song

Play mode.

In the Song Play mode, select a Song to be created.

Set the Mixing parameters (including the Voice settings)

by following the instructions on pages 103 - 104.

3Press the [●] (Record) button to enter the Song

Record mode.

4Press the [TRACK SELECT] button (the lamp

lights), then select the desired track from the

number buttons [1] - [16].

SEQ TRANSPORT

LOCATE 1 2

ELEMENT/ PERF. PART/ ZONE

87654321

16 MUTE

TRACK

SELECT

SOLO

1412 13

tempo

scene 1-16

5Set the parameters related to recording in the

[F1] SETUP display.

Set the parameters related to the Voice you wish

to use during recording in the [F2] VOICE display.

7Press the [F] (Play) button to start recording.

8Press the [■] (Stop) button to stop recording.

9Press the [F] (Play) button to hear your newly

recorded song.

10 Record additional melody parts to the other

tracks as needed by repeating steps #3 - 9 above.

11 Save the created Song data to a SmartMedia/USB

storage device (page 132) before turning the

power off.

This lets you turn the click sound (metronome)

on/off for recording. (Press the [F5] button.)

Bank Number

SEQ TRANSPORT

LOCATE 1 2

Start recording

Actual recording

starts after one

measure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 118

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info