Bedienungsanleitung Yamaha MOTIF ES7 (Seite 119 von 300) (Englisch)

571272

119

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Quick Guide — Advanced Course

Creating a Song on the MOTIF ES

119

Owner’s Manual

■

Re-recording a speciﬁc part of a Song (Punch In/Out)

Use the Punch In/Out recording method to record over only a

speciﬁc portion of the track. In the example instructions

below, you’ll see how to re-record measures three through ﬁve

of an already recorded Song.

Set the Type parameter to “punch” and specify the area to be

re-recorded.

Set other parameters as necessary. See page 222 for details.

nPunch In/Out recording is available only in the Song Record mode.

This is not available in the Pattern Record mode.

■ Recording additional notes to an already-

recorded track (Overdub)

Use the Overdub recording method when you want to add

more data to a track that already contains data. This is useful

not only for recording more notes to a track; it’s also

convenient for adding non-note, sound-shaping data, such as

that of the Knobs and Ribbon Controller.

Set the Type parameter to “overdub.”

Set other parameters as necessary. See page 222 for details.

Playback starts, and the notes (or controller data) you play

are added to the existing data.

In the Song Play mode, select a Song to be created.

2Press the [●] (Record) button to enter the Song

Record mode.

3Press the [TRACK SELECT] button (the lamp

lights), then select the desired track from the

number buttons [1] - [16].

4Set the parameters related to recording in the

[F1] SETUP display.

5Press the [F] (Play) button to start recording.

6Press the [■] (Stop) button to stop recording

after the Song playback reaches the Punch Out

point.

7Press the [F] (Play) button to hear the part

you’ve just re-recorded.

Punch In (Recording start measure : beat)

Playback of the recording track is turned off from this point, and

your keyboard performance will be recorded to the track. Location setting

(page 58)

Punch Out (Recording end measure : beat)

Recording ends at this point and normal playback of the

recording track starts.

Press the [SF1] COPY LOC to assign the measure numbers registered to

the Locations (Loc1 and Loc2) to the Punch In and Punch Out points.

SEQ TRANSPORT

LOCATE 1 2

When Song playback

reaches the Punch In

point, play the keyboard.

Playback start

8Save the created Song data to a SmartMedia/USB

storage device (page 132) before turning the

power off.

1In the Song Play mode, select a song to be

created.

2Press the [●] (Record) button to enter the Song

Record mode.

3Press the [TRACK SELECT] button (the lamp

lights), then select the desired track from the

number buttons [1] - [16].

4Set the parameters related to recording in the

[F1] SETUP display.

5Press the [F] (Play) button to start recording.

6Press the [■] (Stop) button to stop recording

after the Song playback reaches the Punch Out

point.

7Press the [F] (Play) button to hear the part

you’ve just re-recorded.

8Save the created Song data to a SmartMedia/USB

storage device (page 132) before turning the

power off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 119

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info