Bedienungsanleitung Yamaha MOTIF ES7 (Seite 120 von 300) (Englisch)

571272

120

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Creating a Song on the MOTIF ES

120 Owner’s Manual

Quick Guide — Advanced Course

Rehearsing parts before recording

The MOTIF ES has a convenient Rehearsal mode in

recording, that lets you easily and temporarily disable

recording in order to practice a part or try out various

ideas (while listening to the other tracks) without actually

recording.

To temporarily disengage the record mode and enter

the “Rehearsal” mode, simply press the [●] (Record)

button during realtime recording – the [●] (Record)

indicator will ﬂash and playback will continue

uninterrupted but no data will be recorded. To return to

the record mode press the [●] (Record) button again –

the [●] (Record) indicator will light continuously. You

can repeat this process as often as you wish, pressing

the [■] (Stop) button to cancel the Rehearsal mode.

The Record button lamp indicates the Recording/

Rehearsal status: continuously lit indicates Recording,

and ﬂashing indicates Rehearsal.

Insert a Tempo change event to the

middle of the Song

You can use the following three methods to change the

tempo in the middle of the already-recorded song.

●Using the Tempo track

Start recording after setting the Type parameter to

“replace,” setting RecTrack to “tempo,” and moving the

cursor to the tempo value in step #4 on page 118.

During recording, change the tempo value while

listening to Song playback.

●Song Edit

In the Song Play mode, press the [EDIT] button to enter

the Song Edit mode. Select the Tempo track (TMP) by

pressing the [F4] TR SEL button once or twice, then

change the existing tempo value or insert a new tempo

value by using the [F5] INSERT button.

For details about Song Edit, see page 124.

●Step Recording

In step #4 on page 118, set the Type parameter to

“step” and RecTrack to “tempo” then press the [F]

(Play) button to start Step recording. After moving the

cursor to “Value,” move the song pointer by using the

[H] (Forward) button and change the tempo value at

the desired point.

For details about Step Recording, see page 238.

Song Recording using a Performance

If you have a favorite Performance or one that would ﬁt

the Song to be recorded, you can copy certain settings

of up to four Parts of the Performance to the Song

Mixing settings currently being edited.

1Enter the Song Mixing Job mode ([SONG] →→

→→

[MIXING] →→

→→ [JOB]).

2Press the [F5] PF COPY button to call up the

Performance Copy display.

3Set the parameters as necessary in the [F5] PF

COPY display, then press the [ENTER] button to

execute the Copy operation.

4Press the [SONG] button to return to the Song

Play mode, then select Track 1 and play the

keyboard.

Check whether the sound you hear is the same as

that of the source Performance or not.

5Record your keyboard performance to Track 1.

6Store the Song Mixing in the [SONG] →→

→→ [MIXING]

→→

→→ [STORE] display.

The settings copied from the Performance should be

stored as Song Mixing data.

7Save the created Song data to a SmartMedia/USB

storage device (page 132) before turning the

power off.

nThe explanations above also apply to the Pattern mode.

Step Recording

The explanations in this Quick Guide have concentrated

on Realtime Recording. However, the Step Recording

method is also available, letting you record a Song by

entering notes and events individually — much like

writing them down on paper. This is especially useful for

recording passages that would be difﬁcult or impossible

to play. The Step Recording can be executed by setting

the Type to “step” in the [F1] SETUP display in the Song

Record mode. For details on using Step Recording, see

page 238.

nStep Recording can be used both in the Song Record mode

and the Pattern Record mode.

TIP

SEQ TRANSPORT

LOCATE 1 2

SEQ TRANSPORT

LOCATE 1 2

Recording Rehearsal mode

(playback continues)

TIP

The destination Mixing Parts appear automatically. The displayed

Part numbers differ depending on the source Performance. If the

source Performance contains four Parts, “1, 2, 3, 4” appears here.

Select a source Performance.

Checkmark the boxes of the

desired parameters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 120

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info