Bedienungsanleitung Yamaha MOTIF ES7 (Seite 122 von 300) (Englisch)

571272

122

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Creating a Song on the MOTIF ES

122 Owner’s Manual

Quick Guide — Advanced Course

Using the Groove function

Just as in the Pattern Play mode, the Groove function is

available also in the Song Play mode.

For details, refer to the explanation of Groove in the Pattern

Play mode (page 114).

The created Song data resides temporarily in DRAM (page 187). Because

data contained in DRAM is lost when the power is turned off, you should

always store any data residing in DRAM to a SmartMedia/USB storage

device before turning off the power.

Sampling a one-shot sound to a Song

track

The MOTIF ES conveniently lets you sample audio material,

even while a Song is playing. This allows you to quickly and

easily “ﬂy in” samples to your Song as you need them — for

example, capturing short sound effects from a CD, or

recording background vocal phrases with a microphone.

Sounds like these can be added to the Song as desired, and

can even be aligned in time as needed after recording in the

Song Edit mode.

In order to use the Sampling function, DIMM modules must be

installed to the instrument. For details on installing DIMMs, see page

289.

Follow steps #1 - 8 on page 73, substituting the instructions

below for steps #4 and 8.

In step #4, press the [SONG] button to enter the Song Play

mode then select a song to be created.

In step #8, set the related parameters from the AUDIO IN

display ([SONG] → [MIXING] → [EDIT] → [COMMON] → [F5]

AUDIO IN).

Type: sample+note

Source: A/D

Next: off

Mono/Stereo: stereo

Frequency: 44.1k

For details about each parameter, see page 253.

Set the TrggrMode (Trigger Mode) to “meas” then specify the

Punch In measure (at which the Sampling starts

automatically) and the Punch Out measure (at which

Sampling stops automatically).

1In the Song Play mode, select a Song for which

the Groove settings are to be applied.

2Press the [F2] GROOVE button to call up the

Groove setting display.

3Select a track, then adjust the Groove settings.

4Save the created Song data to a SmartMedia/USB

storage device (page 132) before turning the

power off.

1Connect an audio device (CD player, etc.) to the

instrument.

2Press the [INTEGRATED SAMPLING] button in

the Song mode to enter the Sampling mode.

CAUTION

3Press the [F2] SOURCE button to call up the

display for setting the Sampling Source, then set

the parameters as shown below.

4Press the [F1] DEST button to call up the display

for setting the Sampling Destination, set the

parameters as described below.

Track This parameter determines the Song track to which the

Sample Voice is assigned.

Keybank This parameter determines the note to which the sample

is assigned.

5Press the [F6] REC button to call up the

Sampling Record display (Sampling Standby

status), then set the parameters as required.

Punch Out measure

Measure number at which

Sampling stops

automatically

Punch In measure

Measure number at which

Sampling starts automatically

Indicates Sampling

Standby status.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 122

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info