Bedienungsanleitung Yamaha MOTIF ES7 (Seite 123 von 300) (Englisch)

571272

123

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Quick Guide — Advanced Course

Creating a Song on the MOTIF ES

123

Owner’s Manual

Doing this puts sample recording on standby, waiting for

song/pattern playback to reach the speciﬁed Punch-in

measure.

Audio is recorded to the instrument.

Press the [F3] AUDITION button to hear the sampled sound.

If you’re not satisﬁed with the results and you wish to try

again, press the [F4] CANCEL button to return to the

Sampling Standby display and try sampling from step #5

again. If you are satisﬁed with the results, press the [F5] OK

button to store the sampled sound as a “sample” and return

to the [F1] DEST or [F2] SOURCE display.

Keep in mind that if the Conﬁrm function is turned off in step

#5 above, the display shown above will not appear when

stopping sampling. Instead, stopping sampling returns

directly to the [F1] DEST or [F2] SOURCE display.

Listen back to the Song (the sample automatically sounds

along with playback) and check that the timing is correct. If

you’re not satisﬁed with the timing, you can adjust it as

needed in the Song Edit mode. For details about Song Edit,

see page 124.

Registering a Song Scene and Arpeggio type simultaneously to the [SF1] - [SF5] buttons

Song Scenes and Arpeggio types can both be registered to the [SF1] - [SF5] buttons (when the ARP1 - ARP5 menu items are shown

at the bottom of the display). These settings are stored as Song data. Song Scene is a powerful function that allows you to store ﬁve

different “snapshots” of important Song related parameters – including transpose, tempo, track mute status, and the basic sound/

mixing controls (all parameter settings controllable from the Knobs with the [PAN/SEND] or [TONE] lamp turned on, and the Control

Sliders). The Arpeggio function and Arpeggio types are discussed in detail in the Voice mode, on page 66. You can call up both the

Song Scene and Arpeggio type simultaneously by simply pressing one of the [SF1] - [SF5] buttons (when ARP1 - ARP5 are shown at

the bottom of the display in the Song mode).

6Press the [F6] REC button again enable Punch In

Waiting.

7Press the [F] (Play) button to start Song

playback.

8Start the audio equipment when the Song

reaches the Punch In point (when sampling

actually starts).

Indicates that sample recording is waiting for song/pattern

playback to reach the speciﬁed Punch-in measure.

9Stop the audio equipment when the Song

reaches the Punch Out point (when sampling

stops).

10 Press the [SONG] button or [EXIT] button to

return to the Song Play mode.

11 Press the [F] (Play) button to play the Song.

12 Save the Song data to a SmartMedia/USB

storage device in the File mode (page 132) before

turning the power off.

SCENE SF1 SF2SF3SF4SF5

SCENE STORE

SET LOCATE

STORE SCENE SF1 SF2SF3SF4SF5

ARPEGGIO

ON/OFF

●Registering a Song Scene and Arpeggio type

simultaneously to the [SF1] - [SF5] buttons

●Recalling a Song Scene and Arpeggio type

simultaneously from the [SF1] - [SF5] buttons

In the Song mode, you can register the Song Scene and Arpeggio

type simultaneously to the [SF1] - [SF5] buttons only when the

ARP1 - ARP5 menus appear at the bottom in the display.

Simultaneously hold

the [STORE] button

and press one of

the [SF1] - [SF5]

buttons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 123

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info