Bedienungsanleitung Yamaha MOTIF ES7 (Seite 255 von 300) (Englisch)

571272

255

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Sampling Mode

Sampling Edit mode

255

Owner’s Manual

This mode gives you a variety of sample editing tools, with which you can change the samples you’ve recorded in the Sampling Record mode,

and customize them for your applications as needed.

nFor samples that have been recorded in stereo (with Stereo Sampling), both the left and right waves of the sample are edited together. In the actual process,

any edits made to the left channel wave are duplicated exactly in the right channel. The exception to this, of course, is Pan — since the sample already is in

stereo.

nUnlike in the Sampling Record mode, all parameters and functions of the Sampling Edit mode are the same, no matter which mode was previously selected.

nAll Sampling Edit operations apply to the Waveform (actual sample), not the voice.

Measure Determines the number of measures in the sample to be sliced.

When the slice operation is executed, sequence data corresponding to the speciﬁed number of measures is

created. The sequence data is created from the beginning of the current measure at which sampling is started.

Settings: 1~8

Meter Speciﬁes the meter (time signature) of the sample. The setting here is the basic slice unit.

Settings: 1/16 ~ 16/16, 1/8 ~ 16/8, 1/4 ~ 8/4

SubDivide The Meter parameter sets the basic slice unit, and SubDivide

speciﬁes even ﬁner resolution for phrases containing regions with

shorter notes. For the phrase shown at right, for example, the

Meter should be set to 4/4 and SubDivide to 1/2.

Settings:

When Meter is set to 1 ~ 8/4 ............. quarter note (1/1), 8th note (1/2), 4th

note triplet (1/3), 16th note (1/4), 8th note

triplet (1/6), 32nd note (1/8), 16th note triplet (1/12)

When Meter is set to 1 ~ 16/8 ........... 8th note (1/1), 16th note (1/2), 8th note triplet (1/3), 32nd note (1/4), 16th note triplet (1/6)

When Meter is set to 1 ~ 16/16 ......... 16th note (1/1), 32nd note (1/2), 16th note triplet (1/3)

nThis parameter has no effect when the Slice Type parameter is set to beat 1~3.

nThe maximum slice resolution for stereo samples is 64 slices, and for mono samples 128 slices.

Sens (Envelope Sensitivity) Further adjusts the sub-divisions speciﬁed by the SubDivide parameter. Higher values result in higher resolution,

allowing even ﬁner notes and smaller sounds to be detected and sliced. Use the Audition function (press [SF1]) to

hear the results, and if you’re not satisﬁed with them, change the setting and try again.

Settings: 1 ~ 5

nThis parameter has no effect when the “quick” slice type is selected.

Sampling Edit mode [INTEGRATED SAMPLING] → [EDIT]

[F1] KEYBANK

From this display you can determine the destination location to which the recorded sample will be stored.

Waveform Select a Waveform that contains a Sample you wish to edit. Move the cursor to the Waveform number and select the

desired number by using the [INC/YES] button, [DEC/NO] button, or the data dial.

To select the desired Key Bank, simultaneously hold down the [INFORMATION] button and press the appropriate

key on the keyboard. Press the [SF2] SELECT button to call up in order the Samples assigned to the selected Key

Bank.

Keybank Indicates information about the selected Key Bank. The Key Range and Velocity Range (which cannot be edited

here) can be edited in the [F4] RANGE display.

[SF1] AUDITION You can hear (audition) the selected sample by pressing the [SF1] button.

[SF2] SELECT Press the [SF2] button to call up in order the Samples assigned to the selected Key Bank.

nThe [SF1] AUDITION and [SF2] SELECT buttons can be used in the same way also with other displays in the Sampling Edit mode and the Sampling Job mode.

[F2] TRIM

This operation is the same as in the Sampling Record mode (when Sampling Type is set to “slice+seq”). See page 253.

[F3] PARAM (Parameter)

Level Determines the output level of the selected sample.

Settings: -94.5dB ~ -0.0dB

Pan Determines the stereo position of the selected sample. Please note that this is not available for samples recorded in

stereo.

Settings: L64 (far left) ~ C (center) ~ R63 (far right)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 255

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info