Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 106 von 118) (Englisch)

586891

106

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

About MIDI

MOTIF-RACK XS Owner’s Manual

106

Basic Structure

Reference

Voice

Multi Utility

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

Portamento Time (Control #5)

Messages which control the duration of portamento, or a

continuous pitch glide between successively played notes.

When the parameter Portamento Switch (Control #065) is set to

on, the value set here can adjust the speed of pitch change.

Setting the value to 127 produces maximum portamento time

and 0 results in minimum portamento time.

Data Entry MSB (Control #6)

Data Entry LSB (Control #38)

Messages which set the value for the parameter speciﬁed by

RPN MSB/LSB. Parameter value is determined by combining the

MSB and LSB.

Main Volume (Control #7)

Messages which control the volume of each Part. Setting the

value to 127 produces maximum volume and 0 results in volume

off.

Pan (Control #10)

Messages which control the stereo panning position of each

Part (for stereo output). Setting the value to 127 positions the

sound to the far right and 0 positions the sound to the far left.

Expression (Control #11)

Messages which control intonation expression of each Part

during performance. Setting the value to 127 produces

maximum volume and 0 results in volume off.

Hold1 (Control #64)

Messages which control sustain on/off. Setting the value

between 64 – 127 turns the sustain on, between 0 – 63 turns the

sustain off.

Portamento Switch (Control #65)

Messages which control portamento on/off. Setting the value

between 64 -127 turns the portamento on, between 0 – 63 turns

the portamento off.

Sostenuto (Control #66)

Messages which control sostenuto on/off. Holding speciﬁc notes

and then pressing and holding the sostenuto pedal will sustain

those notes as you play subsequent notes, until the pedal is

released. Setting the value between 64 -127 turns the sostenuto

on, between 0 – 63 turns the sostenuto off.

Harmonic Content (Control #71)

Messages which adjust the ﬁlter resonance set for each Part.

The value set here is an offset value which will be added to or

subtracted from the Voice data. Higher values will result in a

more characteristic, resonant sound. Depending on the Voice,

the effective range may be narrower than the range available for

adjustment.

Release Time (Control #72)

Messages which adjust the AEG release time set for each Part.

The value set here is an offset value which will be added to or

subtracted from the Voice data.

Attack Time (Control #73)

Messages which adjust the AEG attack time set for each Part.

The value set here is an offset value which will be added to or

subtracted from the Voice data.

Brightness (Control #74)

Messages which adjust the ﬁlter cutoff frequency set for each

Part. The value set here is an offset value which will be added to

or subtracted from the Voice data. Lower values result in a softer

sound. Depending on the Voice, the effective range may be

narrower than the range available for adjustment.

Decay Time (Control #75)

Messages which adjust the AEG decay time set for each Part.

The value set here is an offset value which will be added to or

subtracted from the Voice data.

Effect1 Depth (Reverb Send Level) (Control #91)

Messages which adjust the send level for the Reverb effect.

Effect3 Depth (Chorus Send Level) (Control #93)

Messages which adjust the send level for the Chorus effect.

Data Increment (Control #96)

Data Decrement (Control #97)

Messages which increase or decrease the MSB value of pitch

bend sensitivity, ﬁne tune, or coarse tune in steps of 1. You will

need to assign one of those parameters using the RPN in the

external device in advance. The data byte is ignored. When the

maximum value or minimum value is reached, the value will not

be incremented or decremented further. (Incrementing the ﬁne

tune will not cause the coarse tune to be incremented.)

RPN (Registered Parameter Number) LSB (Control #100)

RPN (Registered Parameter Number) MSB (Control #101)

Messages which offset, or add or subtract values from a Part's

pitch bend sensitivity, tuning, or other parameter settings. First

send the RPN MSB and RPN LSB to specify the parameter

which is to be controlled. Then use Data Increment/Decrement

(page 94) to set the value of the speciﬁed parameter. Note that

once the RPN has been set for a channel, subsequent data

entry will be recognized as the same RPN’s value change.

Therefore after you use the RPN, you should set a Null (7FH,

7FH) value to avoid unexpected results. The following RPN

numbers can be received.

■

Channel Mode Messages

The following Channel Mode Messages can be received.

All Sounds Off (Control #120)

Clears all sounds currently sounding on the speciﬁed channel.

However, the status of channel messages such as Note On and

Hold On is maintained.

RPN MSB RPN LSB PARAMETER

00 00 Pitch Bend Sensitivity

00 01 Fine Tune

00 02 Coarse Tune

7F 7F Null

2nd BYTE 3rd BYTE MESSAGE

120 0 All Sounds Off

121 0 Reset All Controllers

123 0 All Notes Off

126 0 – 16 Mono

127 0 Poly

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 106

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info