Bedienungsanleitung Yamaha MOTIF8 (Seite 235 von 300) (Englisch)

571289

235

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

235

MOTIF Reference

Sampling Record mode

Reference Sampling mode

8 Stop the Sampling following the instructions above

and stop the recording source playback.

9 Set the Slice parameters as needed— if you’ve

entered the Sampling Record mode from the Song/

Pattern mode, and you’ve set the Sampling type to

“slice+seq” in step #5 above.

10 Save the recorded sample to the memory card/

SCSI storage device as a Waveform, User voice, or

Sample voice, as required.

The recorded (edited) phrase data resides temporarily in

DRAM (page 64). Because data contained in DRAM is

lost when the power is turned off, you should always save

any data residing in DRAM to a memory card or an

external SCSI device before turning off the power.

• The operations corresponding to steps #4 - 9 are

covered in the following explanations.

• For details on step #10, refer to “File mode” on

page 264.

Sampling Setup

The explanations here apply to steps #4 and #5 of the

Basic Procedure on page 234.

■ [F1] Sampling Destination settings

The explanations here apply to step #4 of the Basic

Procedure on page 234.

● When entering the Sampling mode from the

Voice/Performance mode

n The MOTIF can transfer wave data to and from the

computer (with TWE software) only when this display is

called up.

• Waveform

Determines the Waveform number to which the recorded

sample is assigned.

❏ Settings 001~256

• Keybank

Determines the note number located at the center of the

Key Bank.

❏ Settings C-2 ~G8

n For details about the Waveform and Key Bank, see

page 60.

• Part

Determines the performance part to which the recorded

sample is assigned. This is available only when entering

the Sampling mode from the Performance mode.

❏ Settings off, 1~ 4

• Voice

The recorded sample can be stored as a User Normal voice.

This parameter determines a User Normal voice number

to which the recorded sample is assigned.

❏ Settings off, 1~128

n When this is set to “off,” only a Waveform is

created; the sample is not stored as a User voice.

The sample is stored to the smallest numbered

Waveform available. If you wish to hear the new

sample and later assign it to a User voice, go to the

Element Oscillator display ([F1]-[SF1]) in the

Voice Edit mode and search the User Waveforms

to ﬁnd the sample. For details, see page 135.

● When entering the Sampling mode from the

Song/Pattern mode

• Track

Determines the track number to which the recorded

sample is assigned.

❏ Settings 1~16

• Keybank

Determines the note number located at the center of the

Key Bank. This parameter is available only when the

Sampling type is set to “sample” or “sample+note” (in the

Type parameter below).

❏ Settings C-2~G8

When Trigger mode is set to Meas :

Sampling Standby

Sampling Stop

Sampling Start

Punch-in Waiting

Press the [F6] button.

Start playback of the song or pattern.

When the appropriate Punch-in

measure is reached, sampling starts.

When the appropriate Punch-out

measure is reached, sampling

stops. Otherwise, to stop

sampling, press the [F6] button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 235

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info