Bedienungsanleitung Yamaha MOTIF8 (Seite 258 von 300) (Englisch)

571289

258

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

258

MOTIF Reference

Utility mode

Reference Utility mode

[F5] MIDI settings

● [F5]-[SF1] MIDI Channel

From this display you can make basic MIDI settings.

• BasicRcvCh (Basic Receive Channel)

Determines the MIDI channel over which the MOTIF

receives MIDI data (from an external sequencer, MIDI

controller, or other device). This parameter is available for

the Voice / Performance mode.

❏ Settings 1~16, omni (all channels), off

• KBDTransCh (Keyboard Transmit Channel)

Determines the MIDI channel over which the MOTIF

sends MIDI data (to an external sequencer, tone generator,

or other device). This parameter is available for the Voice /

Performance mode.

❏ Settings 1~16, off

n In the Song/Pattern mode, the MIDI data created by playing

the keyboard/knobs/wheels is sent to the tone generator

block or the external MIDI devices via the MIDI output

channel of the currently selected track (page 38).

• DeviceNo. (Device Number)

Determines the device number used by the MOTIF in

receiving or transmitting data. This number must match

the Device Number of the external MIDI device when

transmitting/receiving bulk data, parameter changes or

other system exclusive messages to/from it.

❏ Settings 1~16, all, off

• FileUtilID (File Utility ID)

This determines the ID number used in conjunction with

ﬁle transfers using the special File Utility software in the

included CD-ROM. This File Utility ID number and the

Device Number (above) must match the ones of the the

File Utility software in order to properly transfer ﬁles

between the MOTIF and a connected computer.

❏ Settings: 1~128

● [F5]-[SF2] MIDI Switch

From this display you can determine which types of

MIDI data the MOTIF transmits and responds to.

• BankSel

This switch enables or disables Bank Select messages, both

in transmission and reception. When this is set to “on,”

the MOTIF responds to incoming Bank Select messages,

and it also transmits appropriate Bank Select messages

(when using the panel).

❏ Settings off, on

• PgmChange (Program Change)

This switch enables or disables Program Change messages,

both in transmission and reception. When this is set to

“on,” the MOTIF responds to incoming Program Change

messages, and it also transmits appropriate Program

Change messages (when using the panel).

❏ Settings off, on

• CtrlChange (Control Change mode)

This parameter lets you set the MOTIF to properly

respond to either type of GM System data, Level 1 or Level

2 — particularly regarding AEG Sustain. When using GM

Level 2, set this to Mode 1, and the MOTIF responds to the

messages as parameter change data. When using GM

Level 1, set this to Mode 2, and the MOTIF responds to the

messages as control change data.

❏ Settings mode1, mode2

• LocalCtrl (Local Control On/Off)

This determines whether or not the tone generator of the

MOTIF responds to your keyboard playing. Normally, this

should be set to “on” — since you’ll want to hear the

sound of the MOTIF as you play it. However, for external

sequencer applications, you may need to set this to “off” to

avoid getting “double” notes, in which the tone generator

of the MOTIF is played twice — once by the keyboard and

once again by the keyboard data routed through the

sequencer.

Even if this is set to “off,” the data will be transmitted

through the MIDI OUT or USB terminal. Also, the

MOTIF’s tone generator block will respond to messages

received via the MIDI IN or USB terminal.

❏ Settings off, on

• RcvBulk (Receive Bulk)

Determines whether or not Bulk Dump data can be

received.

❏ Settings protect (not received), on (received)

● [F5]-[SF3] MIDI Sync

From this display you can set various parameters

related to MIDI clock and synchronization.

• MIDI Sync

Determines whether Song/Pattern/Arpeggio playback will

be synchronized to the MOTIF’s internal clock or an

external MIDI clock.

❏ Settings internal, MIDI, MTC

internal

Synchronization to internal clock. Use this setting when

the MOTIF is to be used alone or as the master clock

source for other equipment.

MIDI

The MOTIF is synchronized to a MIDI clock received

from an external MIDI device via the MIDI IN or USB

terminal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 258

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info