Bedienungsanleitung Yamaha MOTIF8 (Seite 259 von 300) (Englisch)

571289

259

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

259

MOTIF Reference

Utility mode

Reference Utility mode

MTC (MIDI Time Code)

The MOTIF is synchronized to an MTC signal received

via the MIDI IN or USB terminal. MMC signals are

transmitted via the MIDI OUT or USB terminal. Use this

setting when the MOTIF is to be used as a MIDI slave,

such as when synchronized to an MTC-capable MTR.

n The MTC Sync function is available only in the

Song mode. The Pattern playback (in the Pattern

mode) and the Arpeggio playback (in the Voice/

Performance mode) cannot be synced to MTC.

n MTC (MIDI Time Code) allows simultaneous

synchronization of multiple audio devices via

standard MIDI cables. It includes data

corresponding to hours, minutes, seconds, and

frames. The MOTIF does not transmit MTC. A

device such as the Yamaha AW4416 is necessary in

order to the MOTIF as an MTC master.

n MMC (MIDI Machine Control) allows remote

control of multitrack recorders, MIDI sequencers,

etc. A MMC-compatible multitrack recorder, for

example, will automatically respond to start, stop,

fast forward, and fast reverse operations performed

on the controlling sequencer, thus keeping

playback of the sequencer and multitrack recorder

aligned.

• ClockOut

Determines whether MIDI clock (F8) messages will be

transmitted via the MIDI OUT/USB terminal.

❏ Settings on (transmitted), off

• SeqCtrl (Sequencer Control)

Determines whether Sequencer Control signals — start,

continue, stop, and song position pointer — will be

received and/or transmitted via the MIDI OUT/USB

terminal.

❏ settings off, in, out, in/out

off

Not transmitted/recognized.

Recognized but not treansmitted.

out

Transmitted but not recognized.

in/out

Transmitted/recognized.

• MTC StartOffset

Determines the speciﬁc time code point from which

sequence playback starts, when MTC is received. This

feature can be used to accurately align playback of the

RS7000 with an external MTC-compatible device.

❏ Settings Hour : Minute : Second : Frame

Hour

00 ~23

Minute

00 ~59

Second

00 ~59

ame 00 ~29

● [F5]-[SF4] MIDI Other

From this display you can set parameters related to

the MIDI terminals and port number.

• MIDI IN/OUT

Determines which physical output terminal(s)

will be used for transmitting/receiving MIDI data:

MIDI IN/OUT/THRU, USB, or mLAN (when the

optional mLAN8E has been installed).

❏ Settings MIDI, USB, mLAN

n Three types of terminals above cannot be used at

the same time. Only one of them can be used to

transmit/receive the MIDI data.

• ThruPort (Through Port)

Many computer sequencers are capable of transmitting

data over several MIDI ports, effectively breaking the 16-

channel barrier. When using the USB terminal for MIDI

transmission/reception, you can have the MOTIF respond

to MIDI data over one port, while relaying the data for

another port number to a separate tone generator

(connected to the MIDI OUT terminal). In this way, 16

channels of data can be played on the MOTIF and another

16 can be played on the connected device. Plug-in boards

installed to the MOTIF can also be independently

addressed via separate MIDI ports (page 38), further

expanding the amount of channels.

Make sure to set Thru Port to the intended port number of

the connected device.

❏ Settings 1~8

[F6] Plug-in board settings

When a Plug-in board is installed, the following

displays and parameters are available. The particular

parameters available depends on the type of Plug-in

board that is installed.

n An Effect Plug-in board can only be installed to slot 1,

while a Multi-part Plug-in board can only be installed to

slot 3. Single Part Plug-in boards can be installed to any

of the three slots.

● [F6]-[SF1] Plug-in board Status

• PolyExpand

This parameter is accessible only when you have two or

three identical Plug-in boards installed on the MOTIF.

The “off” setting enables two or three boards to work

separately (you can select them in two or three different

Parts). When this is set to “on,” the two boards effectively

function together as one board (used in a single part) —

giving you double the amount of polyphonic notes you can

play at one time.

❏ Settings on, off

The name of the Plug-in Board is displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 259

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info