Bedienungsanleitung Yamaha MOTIF8 (Seite 260 von 300) (Englisch)

571289

260

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

260

MOTIF Reference

Utility Job mode

Reference Utility mode

● [F6]-[SF2] Plug-in board MIDI

From this display you can set various MIDI-related

parameters for the Plug-in board.

• DevNo (Device Number)

Determines the MIDI Device Number of the Plug-in

Board. This number must match the Device Number of the

external MIDI device when transmitting/receiving bulk

data, parameter changes or other system exclusive

messages to/from it.

❏ Settings 1~16, all, off

• PORT NO. (Port number)

Determines the MIDI Port number over which the Plug-in

board receives MIDI data.One port can be set for the

Multi-part Plug-in board and two ports can be set for the

Single part Plug-in board.

❏ Settings off, 1~3

n The Port number for the Effect Plug-in board (VH)

is ﬁxed to 1.

• GM/XG

Determines whether “GM on” and “XG on” messages are

recognized (on) or not (off) . This parameter is available only

when the Multi-part Plug-in board has been installed to slot 3.

❏ Settings on, off

● [F6]-[SF3] Plug-in board

Native System Parameters (Slot 1)

From this display you can set the Native System

parameters of the Plug-in board installed to slot 1.

For details on these parameters, refer to the owner’s

manual of your particular Plug-in board.

● [F6]-[SF4] Plug-in board

Native System Parameters (Slot 2)

From this display you can set the Native System

parameters of the Plug-in board installed to slot 2.

For details on these parameters, refer to the owner’s

manual of your particular Plug-in board.

● [F6]-[SF5] Plug-in board

Native System Parameters (Slot 3)

From this display you can set the Native System

parameters of the Plug-in board installed to slot 3.

For details on these parameters, refer to the owner’s

manual of your particular Plug-in board.

Utility Job mode

In this Mode, you can restore your MOTIF’s User

memory (SRAM, see page 64 ) to the factory default

settings (Factory Set).

When you restore the factory default settings, all the

current settings for all the User voices and

performances on the User Memory will be overwritten

with the factory defaults.

Make sure you are not overwriting any important data.

You should back up any important data to memory

card/SCSI device beforehand.

◆ Factory Set (Restore Factory

Defaults)

1 In the Utility mode, press the [JOB] button to enter

the Utility Job mode.

2 Press the [ENTER] button. (The display prompts

you for conﬁrmation.)

3 Press the [INC/YES] button to execute the Job.

After the Job has been completed, a “Completed”

message appears and operation returns to the

original display.

n To cancel the Job, press the [DEC/NO] button.

4 Press the [UTILITY] button to exit from the

Utility Job mode back to the Utility mode.

n All settings in the Utility mode that are related to

the Plug-in boards and the mLAN8E are stored

only to the memory on those respective devices,

and not to the User memory of the MOTIF.

Because of this, the Factory Set operation cannot be

used to restore settings for those devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 260

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info