75GW13-014_v02
MAINTENANCE AND CLEANING
It is
a
cleaned after each brewing. Procedure:
Rinse the brew head unit. ●
Rinse the steam wand with steam ● (C).
Wipe the ● (C) clean
espresso machine has been used.
T ● (H) (E) and
of the lter (H) .
and wash it, clean the holes of the lter ● (I).
Important: Never wash parts
a dishwasher
Cleaning the drip tray (I) and the grid (J)
T(J) (I) (23) .
addition of some mild washing-up liquid, rinse and dry
W: (I)
the grid (J) the insert is in the right place.
Cleaning the brew head unit, the lter holder and (E) and the lter (H)
Rinse the lter (H) and (E) with warm
and dry
T
head
blocked with coffee, use a delicate brush.
Rubber seal of the brew head
The
seals the lter holder (E) coffee is poured.
W: It (E)
head unit during
reduce the durability of the seal.
It
tightness between (E) and the
around the
seal is worn out.
W
that the seal of the brew head unit needs replacing.
Outer elements
Wipe
or abrasive cleaning agents as they may scratch outer surfaces.
Cleaning the steam wand (C)
Keeping wand (C) clean is essential
performance of the
(C) will decrease its steaming and frothing capacity
Important: Wipe the (C) clean with damp cloth and with
a little steam after each use.
Should , with
a above (I)
on (C) for
about
procedure.
Important: Never clean the steam wand (C) with an
may damage the wand.
DESCALING
Scale is a mineral build-up which naturally occurs on all appliances
connected with heating
descaling on a regular basis.
W: Descale your coffee maker at least every 3 months. The
damages which caused failure descale the appliance are
subject to warranty repairs.
Descaling solutions
T
makers:
Citric acid solution ●
Dissolve 2 spoonful (ca. 30 g) of citric acid in 1 l of water
Specially designated liquids or tablets. ●
Notice: For liquids and tablets, follow the instructions shown on the
packaging of these products.
Descaling the espresso machine
W: Ensure that the espresso machine is switched off and the
connecting cord is disconnected from the socket.
1. T
agent used, follow the steps below:
A. Espresso machine descaling tablets
Pour about 1l of warm water into the water tank and put in
a
manufacturer the dissolved about
5-7 minutes), replace the tank.
B. Descaling liquid
Pour about 1.5l of
amount of the descaling agent, as recommended by the
manufacturer and replace the tank.
2. If the lter holder (E) is in the brew head unit, take it out, rinse
thoroughly under running water and put it aside.
3. Using unscrew the lter
holder unit.
4. T
aside in a safe place.
Important:
the seal after disassembling the brew head unit.
5. Using a small delicate brush, clean the brewing area of the head
removing all coffee particles.
6. Place a sufciently big container under the brew head unit.
7. Insert
the espresso machine by pressing button (M) .
W: (N)
that
temperature. The moment the espresso machine has reached the
right temperature, (N) will
come of
temperature and is ready to operate.
8. T(K)
half of the decaling solution to ow through the brew head unit.
Important: Do not run the descaling solution through the steam
wand (C) .
W: Depending on the size of the container under the brew
head unit, it may be necessary to empty it during the process.
9. T(K) into 0 to
half (M)
and turn off the appliance.
10. Leave
the descaling agent to work.
1 Next, press button (M) . This will turn on the espresso machine.
12. Turn (K) into
the rest of the descaling solution to ow through the brew head unit.
13. T out tank the appliance rinse thoroughly
under solution
have (1) and
in the espresso machine.
14. Turn (M)
knob (K) into the espresso position .
ow through the brew head. Repeat the procedure twice.
W: Depending on the size of the container under the brew
head unit, it may be necessary to empty it during the process.
15. When
brew head and wipe the whole brew head unit thoroughly
16. Carefully
head, following their disassembling procedure in reverse order
a screwdriver
17. Fill the up fresh (1) and it the espresso
machine. The appliance is ready for further use.
