Bedienungsanleitung Zgonc YPL 710 (Seite 15 von 24) (Deutsch, Englisch)

781890

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

15 І 24

GB Caution - Read the operating instructions to reduce the risk of inquiry

GB Wear safety goggles!

GB Wear ear-muffs!

GB Wear a breathing mask!

This power tool is solely intended for private use. Da

not use the power tool for any other purpose than for

the intended one. Any other use beyond the intended

use is im proper.

For any resulting darnage or injury, the user/Operator is

held liable, not the manufacturer.

Technical Data

Nominal voltage: 230-240 V~

Nominal frequency: 50 Hz

Power consumption: 710 W

Nominalspeed (oscillation

rate) n: 700 - 1700 1/min

Spindie size: M14

Abrasive paper diameter: 225 mm

Protection class: II

Weight.: ca. 4,5 kg

Sound level

Sound pressure Ievel LPA.: 78 dB(A)

Sound power Ievei LWA.: 89 dB(A)

Uncertainty K 3 dB(A)

Hand-arm vibration

When grinding with abrasive

sheets ah

2,28 m/s2

Uncertainty K: 1,5 m/s2

The specied hand-arm vibration value is based on

grinding with an abrasive sheet. Different applications

may result in different values.

The noise and vibration values were determined accord-

ing to EN 60745-1 and EN 60745-2-3.

The specied vibration value was measured an the basis

of a standard test method and can be used to compare

any kind of power tools.

The specied vibration value can also be used for the

initial evaluation of exposure.

Warning! Depending on how you use the power tool,

the actual vibration values may deviate from the spec-

ied values!

Take measures to protect yourself against vibrations!

Make sure to take into account the entire work pro-

cess, i.e. also times when the power tool is operat-

ed without Ioad or switched off! Appropriate meas-

ures include the regular maintenance and care of

the power tool and its attachments, keeping your

hands warm, regular breaksandweil planned work

processes!

Introduction

MANUFACTURER

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We wish you much joy and success in working with your

new device.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability for

damages to the product or damages caused by the prod-

uct that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

We recommend:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advantage

of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in your

country. Keep the operating instructions package with

the machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the instruction

manual each time before operating the machine and

carefully follow its information. The machine can only

be operated by persons who were instructed concern-

ing the operation of the machine and who are informed

about the associated dangers. The minimum age re-

quirement must be complied with.

lntended use

The intended use of this power tool is the sanding of

large areas of drywalls as a preparation before painting

or wallpapering using suitable abrasive sheets.

This power tool is neither suited for the preparation of

small areas, corners and edges, nor for the removal of

wallpaper and the grinding of ceilings and wet grinding.

Do not use the power tool for cutting or roughing or pol-

ishing. Do not use it together with wire brushes. Do not

treat asbestos containing materials with this power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zgonc YPL 710 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info