Bedienungsanleitung Zgonc YPL 710 (Seite 16 von 24) (Deutsch, Englisch)

781890

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

16 І 24

sure that the power tool is switched off before you

connect it to themains and/or insert a battery, pick

it up or carry it. lf you have your nger on the switch

when you carry the power tool, or if the machine is

switched on when you connect it to the mains, this

may result in accidents.

d) Remove adjustment tools or wrenches before

switching on the power tool. Tools or wrenches in

rotating machine parts may cause injury.

e) Avoid abnormal body positions. Stand securely and

keep your balance at all times. By doing so, you can

control the power tool more easily in unexpected Situ-

ations.

f) Wear suitable clothing. Do not wear loose cloth-

ing or jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothing, jewellery or

long hair may be trapped in moving parts.

g) lf dust extraction tools or collection bins can op-

tionally be attached, you must make sure that they

are connected and correctly used. Using dust ex-

traction tools may reduce risks caused by dust.

Use and treatment of the power tool

a)Do not overload the tool. Use the appropriate pow-

er tool for your type of work. With appropriate power

tools, you can work better and more safely within the

given power range.

b) Do not use power tools with defective switches.

Power tools which cannot be switched on or off are

dangerous and must be repaired.

c) PuII out the plug from the socket and/or remove

the battery before you make settings to the tool,

replace accessory parts or put aside the power

tool. These precautionary measures will prevent the

power tool from starting unintentionally.

d) Keep power tools which are not in use away from

children. Only persons who are familiar with the

power tool and who have read the operating in-

structions may use the power tool. Power tools are

dangerous if used by inexperienced persons.

e) Maintain power tools with care. Check moving

parts for proper function and smooth running, and

check whether there are parts which are broken

or damaged to the extent that the functionality of

the power tool is impaired. Have damaged parts

repaired before using the power tool. Many accidents

are caused by poorly-maintained power tools.

f) Keep cutting tools sharp and clean. Carefully main-

tained cutting tools with sharp edges are less likely to

jam and can be guided more easily.

g) Use power tools, accessory parts, insertion tools,

etc. in compliance with these instructions. Take

into account the working conditions and the activity

which is to be carried out. Using power tools for ap-

plications other than those intended may cause dan-

gerous Situations.

Service

a) Have your power tool repaired by qualied special-

ists only, and always use original spare parts for

repair. This is to maintain the safety of the power tool.

General safety notes for power tools

Warning! Read all safety notes and instructions! Non-

compliance with safety notes and instructions may result

in electric shock, re and/or severe injury!

Store all safety notes and instructions for the future.

The term „power tool“ used in the safety notes refers to

power tools connected to the mains (with a power ca-

ble) or operated with a battery (without a power cable).

Workplace safety

a) Keep your workplace clean and wellilluminated.

Disorderliness and poorlyilluminated workplaces may

Iead to accidents.

b) Do not operate the power tool in explosive atmos-

pheres with inammable liquids, gases or dust.

Power tools generate sparks which may ignite dust

or vapours.

c) Keep children and other persons away from the

power tool during operation. You may lose control

of the tool if you are distracted.

Electric safety

a) The plug of the power tool must t into the socket.

Do not modify the plug in any way. Do not use adapter

plugs tagether with grounded power tools. Unmodied

plugs and matehing sockets reduce the risk of electric

shock.

b) Avoid body contact with grounded surfaces such

as pipes, radiators, ovens and refrigerators. There

is an increased risk of electric shock if your body is

grounded.

c) Keep power tools away from rain or humidity. Wa-

ter permeation into the power tool will increase the risk

of electric shock.

d) Use the cable solely for its intended purpose. Do

not use the cable to carry or hang up the power

tool or to pull out the plug from the socket. Keep

the cable away from heat, oil, sharp edges or moving

machine parts. Damaged or twisted cables increase

the risk of electric shock.

e) When working outdoors with power tools, only use

extension cords which are suited for outdoor ar-

eas. Using extension cords suited for outdoor applica-

tions reduces the risk of electric shock.

f) lf the operation of power tools in a humid environ-

ment cannot be avoided, you must use a residual

current circuit breaker. The use of a residual current

circuit breaker will reduce the risk of electric shock.

Personal safety

a) Pay attention to what you are doing and use power

tools sensibly. Do not use power tools when you

are tired or under the inuence of drugs, alcohol

or medication. A single moment of inattention while

using power tools may cause severe injury.

b) Wear personal protective equipment and safety

goggles. Wearing personal protective equipment such

as a dust mask, non-skid safety boots, a protective

helmet or hearing protection according to the type and

application of the power tool reduces the risk of injury.

c) Avoid starting the power tool unintentionally. Make

Zgonc YPL 710 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info