If the above menu does not appear, the MRS-
1044 has not properly recognized the CD-R/RW
drive. Check the power on/off condition of the
drive and the SCSI connection.
5.
Use the cursor [
E
]/[
R
] keys to make the display
indicate "CD-R/RW ALBUM", and then press the
[ENTER] key.
The screen for selecting projects to include in the album
appears.
This screen indicates that no project is currently selected.
6.
Turn the dial to select the project to be used as
track 1 of the album, and press the [ENTER] key.
The screen changes as follows.
(1)Project number
(2)Project name
This shows the name and number of the project to be used
as recording source.
(3)Track number
This shows the track number to be used as write target on
the CD-R/CD-RW disc.
(4)Master track duration
This shows the length of the currently selected V-take of
the master track in the above project.
Only projects with a master track for which a recorded
V-take is selected are shown. If a desired project name
does not come up, check whether a recorded V-take was
selected for its master track.
7.
When the project for track 1 has been selected, use
the cursor [
R
] key to move to track 2.
The screen changes as follows.
This screen indicates that currently no project is selected
for track 2 and later.
8.
Use the dial to select the project to be used as
track 2 of the album.
9.
In the same way, select projects for track 3 and
subsequent tracks.
The maximum allowable number of tracks is 99, provided
that there is enough free capacity on the disc.
• To check the capacity of the disc
Press the [W] key. The remaining time of the disc appears
in the lower part of the display. To return to the previous
screen, press the [
Q] key.
• To audition the master track
Press the PLAY [R] key. The master track of the project
currently shown on the display is played. To stop playback,
press the STOP [
P] key.
