Bedienungsanleitung Atmos A25 (Seite 65 von 96) (Englisch)

810409

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Operation and maintenance manual - EN

www.atmos.cz EN-65

• Parameter S44 – is the compressor function for automatic cleaning of the burner by compressed

air, which determines the duration of compressor operation used for preparing a sufficient amount

of compressed air (pressure function S6 = 16) - nonstandard function… (2 min)

The set value represents the actual time in minutes.

• Parameter S45 – is the electric valve function for automatic cleaning of the burner by compressed

air, which determines how long the el. valve is open to perfectly clean the combustion chamber of

the burner (S14 = 15) - nonstandard function… (1 s)

The set value represents the actual time in seconds.

• Parameter S46 – is the burner fan function which sets the type of used fan with rotation scanning.

Number of impulses.… (

12-EBM

)

• Parameter S47 – is the function of fan 2 which sets the type of used fan with rotation scanning.

Number of impulses – do not change the factory setting… (0)

a) S47 = 12 - EBM..... radial blower of the burner

b) S47 = 4 - ATAS..... exhaust blower of the boiler

c) S47 = 0..... second method for switching off the blower 2 speed sensing

• Parameter S48 – characterizes temperature TEMPERATURE A in the applications of function

S6 = 17 to 36… (75 °C)

This is a free function for the reserve output R (R5) on the first position (Temperature A = first

position in function S6 = 17 to 36 (S67 = 17 až 36)).

• Parameter S49 – characterizes the activation or deactivation difference for TEMPERATURE A

in the applications of function S6 = 17 to 36… (5K)

This is the difference for the free function of reserve output R (R5) on the first position (difference

for Temperature A = difference for the first position in the function S6 = 17 to 36 (S67 = 17 až 36)).

• Parameter S50 – characterizes TEMPERATURE B in the applications of function S6 = 25 to

36...….(75 °C)

This is a free function for the reserve output R (R5) on the first position (Temperature B = second

position in function S6 = 25 to 36 (S67 = 17 až 36)).

• Parameter S51 – characterizes the activation or deactivation difference for TEMPERATURE B

in the applications of function S6 = 25 to 36… (5K)

This is the difference for the free function of reserve output R (R5) on the first position (difference

for Temperature B = difference for the first position in the function S6 = 25 to 36 (S67 = 17 až 36)).

• Parameter S52 – characterizes TEMPERATURE C in the applications of function S6 = 25 to

36...… (75 °C)

This is a free function for the reserve output R2 (R6) on the first position (Temperature C = second

position in function S14 = 17 to 36 (S67 = 17 až 36)).

• Parameter S53 – characterizes the activation or deactivation difference for TEMPERATURE C

in the applications of function S14 = 17 to 36… (5K)

This is the difference for the free function of reserve output R2 (R6) on the second position

(difference for Temperature C = difference for the second position in the function S14 = 17 to 36

(S68 = 17 až 36)).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atmos A25 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atmos A25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info