Bedienungsanleitung Atmos A25 (Seite 66 von 96) (Englisch)

810409

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

www.atmos.cz

66-EN

Operation and maintenance manual - EN

• Parameter S54 – characterizes TEMPERATURE D in the applications of function S14 = 25 to

36…. (75 °C)

This is a free function for the reserve output R2 (R6) on the first position (Temperature D = second

position in function S14 = 25 to 36 (S68 = 17 až 36)).

• Parameter S55 – characterizes the activation or deactivation difference for TEMPERATURE D

in the applications of function S14 = 25 to 36… (5K)

This is the difference for the free function of reserve output R2 (R6) on the second position

(difference for Temperature D = difference for the second position in the function S14 = 25 to 36

(S68 = 17 až 36)).

• Parameter S56 – characterizes control of functioning (speed sensing) of the exhaust blower of

the boiler (blower 2); setting may be different according to use – must never be changed...... (0)

a) S56 = 0 ..... control of the exhaust blower of the boiler turned off

a) S56 = 1 ..... control of the exhaust blower of the boiler turned on

If S56 = 1, parameters S47 and S57 are activated (visualized).

• Parameter S57 – characterizes minimum speed of the blower 2 ....... (1,000 rpm) – must never

be changed

adjustable range ..... 1,000 – 3,200 rpm

It is a function of the control of proper functioning of the exhaust blower of the boiler.

When the blower is running at the speed lower than set, “ALARM VENT 2” is declared.

This function is not used standardly.

• Parameter S58 – characterizes the amount of compressed air for the first pre-cleaningoftheburner

when installing pneumatic cleaning the burner. This is the time at which the partial fillingcompressor

air tank for pre-cleaning of the burner ... (6 s) - standardly do not change

Adjustable range...OFF, 1 - 120 s.

• Parameter S59 – characterizes the amount of compressed air for the second pre-cleaning of the

burner when installing pneumatic burner cleaning. This is the time at which the partial filling

compressor air tank for pre-cleaning of the burner... (OFF) - standardly do not change

Adjustable range...OFF, 1 - 120 s.

• Parameter S60 – characterizes the amount of compressed air for the third pre-cleaning of the

burner when installing pneumatic burner cleaning. This is the time at which the partial filling

compressor air tank for pre-cleaning of the burner... (OFF) - standardly do not change

Adjustable range...OFF, 1 - 120 s.

• Parameter S61 – characterizes the function for control of the boiler exhaust fan from the outlet for

the burner discharge fan via the AD04 module. The function is intended for models DCxxSP(X),

CxxSP, ACxxSP without flap with actuator fitted with the pneumatic burner cleaning options and the

activated function for automatic start of the burner following wood burnout - AUTOSTART... (0)

a) S61 = 0....... function OFF

b) S61 = 1....... function ON (for for profile A25 pneu)

Never activate this function for boilers DCxxGSP and DCxxSP(X), CxxSP, ACxxSP (Model since

2018 equipped with flap with actuator).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atmos A25 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atmos A25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info