Bedienungsanleitung Benning MM 4 (Seite 18 von 120) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

577333

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

09/ 2013

BENNING MM 4



which the current transducer is gripping is under an AC current of 0.1 A.

5.2.3 Sensor type: induction coil for alternating current.

5.2.4

Temperature coefficient of measurement value: 0.15 x (stated measure-

ment accuracy)/ °C with reference to the value at a temperature of 23 °C.

5.2.5 Max. apparent resistance at output: 120 Ω

5.2.6 Widest angle of tongs: 30 mm

5.2.7 Greatest conductor diameter 29 mm

5.2.8 Dimensions of current transducer (L x W x H) = 102 x 77 x 35 mm.

Weight of current transducer: 130 g

Note:

The current transducer can only be used for measurements when it is plugged

into the Multimeter.

6. Ambient conditions

- The BENNING MM 4 is designed only for measuring in dry surroundings,

- Maximum barometric height during measurement: 2000 m.

- Overvoltage category / set-up category: IEC 60664-1/ IEC 61010-1 →

300 V category III, 600 V category II,

- Degree of contamination: 2.

- Protection Class: IP 30 (DIN VDE 0470-1 IEC/ EN 60529)

IP 30 means: Protection against access to dangerous parts and protection

against solid impurities of a diameter > 2.5 mm, (3 - first index). No protec-

tion against water, (0 - second index).

- Operating temperature and relative humidity:

Multimeter

- At operating temperature of 0 °C to 50 °C: relative humidity under 80 %.

- current transducer:

At operating temperature of 0 °C to 45 °C: relative humidity under 75 %.

- Storage temperature:

The BENNING MM 4 can be stored at temperatures from -20 °C to + 60 °C.

The batteries must be removed from the unit.

7. Electrical data

Note: The measurement accuracy is stated as the sum of

- a relative proportion of the reading and

- a number of digits (i.e. numerical steps of the last place).

This measurement accuracy applies for a temperature of 23 °C and a relative

humidity under 75 %.

Sections 7.1 to 7.5 refer to the connection of the Multimeter to the circuit being

measured (current transducer removed). Section 7.6 refers to the combination

of Multimeter with current transducer in place.

7.1 DC voltage ranges

The input resistance is 9 MΩ

Measuring range Resolution Accuracy

Accuracy overload

protection

4.2 V 1 mV ± (0,5 % of reading + 2 digits)

600 V

eff

600

42 V 10 mV ± (0,5 % of reading + 2 digits)

600 V

eff

600

420 V 100 mV ± (0,5 % of reading + 2 digits)

600 V

eff

600

600 V 1 V ± (0,5 % of reading + 2 digits)

600 V

eff

600

7.2 AC voltage ranges

The input resistance is 9 MΩ parallel 100 pF. The reading is obtained by mean-

value rectification and indicated as effective value

Measuring range Resolution Accuracy

Accuracy overload

protection

4.2 V 1 mV

± (1.5 % of reading + 5 digits)

in frequency range 40 Hz - 300 Hz

600 V

eff

600

42 V 10 mV

± (1.5 % of reading + 5 digits)

in frequency range 40 Hz - 500 Hz

600 V

eff

600

420 V 100 mV

± (1.5 % of reading + 5 digits)

in frequency range 40 Hz - 500 Hz

600 V

eff

600

600 V 1 V

± (1.5 % of reading + 5 digits)

in frequency range 40 Hz - 500 Hz

600 V

eff

600

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Benning MM 4 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info