Bedienungsanleitung BH Fitness G690 Monitor LED Manual V7 (Seite 11 von 55) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

528710

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

SK LINE

sportkoncept

English

GENERAL INSTRUCTIONS

The electronic monitor is designed to be easy and intuitive to use. The messages that appear on the bottom

screen (B) will guide the user throughout the whole exercise.

Nevertheless, we recommend that the gym instructor reads through this section carefully to become fully

familiar with the electronic monitor in order to show the user how to operate it correctly.

NOTE: The monitor will switch back to stand-by mode after 4 minutes if no keys are pressed. The monitor can

be switched back to READY by pressing the STOP key.

PERSONALISING THE ELECTRONIC MONITOR

Follow the procedure below to access the monitor’s personalisation mode:

With the machine and the monitor switched off, press and hold the RESET key and turn the main switch (b)

to position 1 Fig. (A), located at the bottom front of the machine.

Fig. A.

1) CHANGING LANGUAGE

With the monitor on, the word “LANGUAGE" will appear flashing on the alphanumeric screen (B), Figure 1.

Press the ENTER key and the current language will start flashing. Select your language using the LEVEL▲

and LEVEL▼ keys and then press ENTER, the word “LANGUAGE” will start flashing again, using the

LEVEL▲ key , pass on to the ( 2 Sounds) setting on the adjoining bottom screen.

2) CHANGING THE SOUND.-

With the word “SOUNDS" flashing, press the ENTER key and the word ON or OFF will start flashing. Select

the flashing value using the LEVEL▲ and LEVEL▼ keys and then press ENTER to confirm, the word

“SOUNDS” will start flashing again, using the LEVEL▲ key to pass to the (3 Text) setting on the adjoining

bottom screen

3) CHANGING THE WELCOME MESSAGE.-

With the word “TEXT” flashing, press the ENTER key and the word ON or OFF will start flashing. Select the

option that is flashing by using the LEVEL ▲ and LEVEL▼ keys Choosing the ON option allows you to

change the monitor’s welcome message.

Once the ON option has been selected, press the ENTER key and a flashing cursor will appear on the

alphanumeric screen (B). Use the LEVEL ▲ and LEVEL ▼ keys to enter a welcome message letter by letter.

Once you have finished entering the message, press the ENTER key for a few seconds and the word “TEXT”

will start flashing. Use the LEVEL ▲ key to pass on to the (4 Manual T) setting on the adjoining bottom

screen. If you wish to exit the personalisation mode press the STOP key.

4) MAX. EXERCISE TIME

With the word “MANUAL T" flashing, press the ENTER key and a figure between 0 and 60 minutes will

start flashing. Select the flashing value using the LEVEL

▲ and LEVEL

▼

keys and then press ENTER to

confirm, the word “MANUAL T” will start flashing again, using the LEVEL▲

key

pass on to the ( 5 SPR

time ) setting on the adjoining bottom screen. If you wish to exit the personalisation mode press the STOP

key.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BH Fitness G690 Monitor LED Manual V7 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info