Bedienungsanleitung Casio 3134 (Seite 12 von 15) (Englisch)

466632

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Operation Guide 3134 3205

Recovery Times

The table below shows the amount exposure that is required to take the

battery from one level to the next.

•The above exposure time values are all for reference only. Actual required

exposure times depend on lighting conditions.

Approximate Exposure Time

Level 5 Level 4 Level 3 Level 2 Level 1

1 hour 12 hours 4 hours

3 hours 58 hours 16 hours

5 hours 119 hours 33 hours

52 hours - - - - - - - - - - - - - - - -

Exposure Level

(Brightness)

Outdoor Sunlight

(50,000 lux)

Sunlight Through a

Window (10,000 lux)

Daylight Through a

Window on a Cloudy

Day (5,000 lux)

Indoor Fluorescent

Lighting (500 lux)

▲

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

•In the Timekeeping Mode, an indicator moves along the ring around the

display as seconds advance.

•The tide graph shows tidal movements for the current date in accordance

with the current time as kept in the Timekeeping Mode.

•The Moon phase indicator shows the current Moon phase in accordance

with the current date as kept in the Timekeeping Mode.

•In the Timekeeping Mode, you can press E to toggle the display contents

as shown below.

Day of week

Month – Day

Day of the Week Screen

PM indicator

Hour :

Minute Second

Barometric Pressure

Graph Screen

Month – Day

Barometric

pressure

graph

Press E.

▲

Hour :

Minute Second

Read This Before You Set the Time and Date!

This watch is preset with a number of city codes, each of which represents

the time zone where that city is located. When setting the time, it is important

that you first select the correct city code for your Home City (the city where

you normally use the watch). If your location is not included in the preset city

codes, select the preset city code that is in the same time zone as your

location.

•Note that all of the times for the World Time Mode city codes are displayed

in accordance with the time and date settings you configure in the

Timekeeping Mode.

To set the time and date manually

1. In the Timekeeping Mode, hold down E until the city code starts to flash,

which indicates the setting screen.

2. Use A and C to select the city code you want.

•Make sure you select your Home City code before changing any other

setting.

•For full information on city codes, see the “City Code Table”.

Year

Second Hour Minute

Day Month

12/24-Hour

Format

Power

Saving

Barometric

Pressure Unit Altitude Unit Temperature

Unit

City Code DST

3. Press D to move the flashing in the sequence shown below to select the

other settings.

5. Press E to exit the setting screen.

Note

•Auto DST ( ) can be selected only while LON, PAR, BER, ATH,

NYC, CHI

, DEN, LAX, ANC, HNL, TYO, SEL, or HKG is

selected as the Home City code. For more information, see “Daylight

Saving Time (DST)” below.

Do this:

Press A.

Use A (+) and C (–).

To do this:

Reset the seconds to 00

Change the hour or minute

Change the year

Change the month or day

Screen

•You also need to enter the Timekeeping Mode in order to configure the

following settings.

Power saving on/off (“To turn Power Saving on and off”)

Temperature, barometric pressure, and altitude units (“To select the

temperature, barometric pressure, and altitude units”)

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour

from Standard Time. Remember that not all countries or even local areas use

Daylight Saving Time.

The time calibration signals transmitted from Mainflingen (Germany), Anthorn

(England), or Fort Collins (the United States) include both Standard Time and

DST data. When the Auto DST setting is turned on, the watch switches

between Standard Time and DST (summer time) automatically in accordance

with the signals.

•Though the time calibration signal transmitted by the Fukushima and

Fukuoka/Saga, Japan transmitters include summer time data, summer time

currently is not implemented in Japan (as of 2007).

•The default DST setting is Auto DST ( ) whenever you select LON,

PAR, BER, ATH, NYC, CHI, DEN, LAX, ANC, HNL, or TYO

as your Home City code.

•If you experience problems receiving the time calibration signal in your

area, it probably is best to switch between Standard Time and Daylight

Saving Time (summer time) manually.

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down E until

the city code starts to flash, which indicates

the setting screen.

2. Press D and the DST setting screen appears.

3. Use A to cycle through the DST settings in

the sequence shown below.

Auto DST ( ) DST off ( ) DST on ( )

DST indicator

•

If you change your Home City to one that is within the same transmitter

area, the current DST setting (AUTO) will be retained. If you change to a

city that is outside your current transmitter area, DST will be turned off

automatically.

Transmitter area city codes

• HKG, SEL, and TYO

• LAX, DEN, CHI, NYC, ANC, and HNL

• LON, PAR, BER, and ATH

• All other city codes

4. When the setting you want is selected, press E to exit the setting screen.

• The DST indicator appears to indicate that Daylight Saving Time is turned on.

Reference

This section contains more detailed and technical information about watch

operation. It also contains important precautions and notes about the various

features and functions of this watch.

Moon Phases and Moon Age

The Moon goes through a regular 29.53-day cycle. During each cycle, the

Moon appears to wax and wane as the relative positioning of the Earth,

Moon, and Sun changes. The greater the angular distance between the Moon

and the Sun,* the more we see illuminated.

* The angle to the Moon in relation to the direction at which the Sun is visible

from the Earth.

This watch performs a rough calculation of the current Moon age starting

from day 0 of the moon age cycle. Since this watch performs calculations

using integer values only (no fractions), the margin for error of the displayed

Moon age is ± 1 day.

Do this:

Use A (east) and

C(west).

Press A.

To do this:

Change the city code

Cycle between Auto DST ( ),

Daylight Saving Time ( ) and

Standard Time ( ).

Toggle between 12-hour (12H)

and 24-hour (24H) timekeeping.

Screen

•The following steps explain how to configure timekeeping settings only.

4. When the timekeeping setting you want to change is flashing, use A and/

or C to change it as described below.

Casio 3134 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3134

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info