Bedienungsanleitung Ciclo HAC 4 Pro (Seite 7 von 15) (Englisch)

588929

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

HL – heart rate limit 1 / 2

Select with UL- or LL-button

Here you can choose, if the current training

should be within the heart rate limit 1 or the

heart rate limit 2.

Note: the heart rate time manager (see 6.

“special functions“) always starts (independent from this setting) with

heart rate limit 1.

Hr / C – heart rate bargraph/cadence

bargraph

Select with UL- or LL-button

Here you can choose, if the bargraph (in the

middle of the display) should be used for heart

rate or cadence (see chap. 5.3).

Cd oFF/on – heart rate time manager

on/off

Select with UL- or LL-button

The heart rate time manager enables you to

make an interval training (two countdowns and

two heart rate limits; all can be set in setting

mode 1): train in two consecutive time intervals which can be repea-

ted as often as desired with two depending heart rate limits.

See also chap. 6.2 heart rate time manager.

CL – Time

Set with UL- or LL-button

Setting range = 00:00 - 23:59 / 00:00 – 12:59

AM/PM

Set the current time.

M – Month

Set with UL- or LL-button

Setting range = 1 - 12

Set the current month.

d – Day

Set with UL- or LL-button

Setting range = 1 - 31

(depending to the month)

Set the current date of day.

y – Year

Set with UL- or LL-button

Setting range = 2005 - 2100

Set the current year.

CA oFF/on – Clock alarm

Select with UL- or LL-button

If clock alarm is switched on, next display

shows the setting of the alarm time.

CA – Set alarm time

Set with UL- or LL-button

Adjust the alarm time.

r – adjust total kilometres/

reset total values

Set with UL- or LL-button

Setting range: 0 – 99999 km /0 - 62136 mi

Reset with short simultaneous pressing UL-

and LL-button.

Here you can adjust the total kilometres and also reset all total values

(and also all daily values). To reset press both left buttons short

simultaneous.

r – adjust total meters (ft) of altitude (up)/

reset total values

Set with UL- or LL-button

Setting range: 0 – 99999 m /

0 - 32808 ft x10

Reset with short simultaneous pressing UL-

and LL-button.

Here you can adjust the total meters (or feet) of altitude (upwards)

and also reset all total values (and also all daily values). To reset

press both left buttons short simultaneous.

Now all settings are done and the HAC is ready for

use.

5. FUNCTIONS

Important:

For the HAC to calculate and indicate all values (and

store them for the pc evaluation), a recording must be star-

ted (see chap. 6.1).

To start the recording press both left buttons (UL- and LL-

button) simultaneous for 4 sec. (the mountain symbol in the

display ‚ ‚ starts blinking as a sign of a running recor-

ding).

To stop the recording press again both left buttons simulta-

neous 4 sec. (mountain symbol stops blinking).

All minimum, maximum and average values (displayed as MIN /

MAX / AV), except average and maximum speed, and all daily values

(DAY,) except daily travelling time and kilometres, are only calculated

when the recording is started (see chap. 6.1).

If the recording is not started at the beginning of the current training,

the values of the sub-functions doesn‘t show the current values, they

show the values of the last recording.

The HAC is equipped with 2 modes: ‚bike mode‘ (when

you insert the HAC on the handlebar bracket it automatical-

ly switches to the bike-mode) and ‚no-bike mode‘ (e.g. while running

or skiing). By short pressing both right buttons (UR- and LR-button),

the HAC switches to the bike mode for 5 minutes, even

when it is not on the handlebar bracket. This way you can recall the

bike values at any time.

Not all functions are available in all modes. If the HAC is

used without being on the handlebar bracket (‚no-bike mode‘), some

functions are missing.

If a small ¿ appears on the right side of the display, the indicated

values apply to Bike 1. In order to display the values for Bike 2,

press both right buttons (UR- and LR-button) simultaneous short

(the changeover is only possible if current speed = 0). A small ¡

will appear on the left side of the display. To switch back to Bike 1,

press again both right buttons simultaneous short, and the display

will show ¿.

The main functions shown on the upper part of the display

of the HAC can be chosen with the UR-button, those

shown on the lower part of the display can be chosen with

the LR-button. The sub-functions can be chosen with the

accompanying left button (UL- or LL-button).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo HAC 4 Pro Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo HAC 4 Pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info