Bedienungsanleitung Ciclo HAC 4 Pro (Seite 8 von 15) (Englisch)

588929

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

The following applies for all sub-functions:

Sub-functions are displayed for 10 seconds, then the main function

appears again. To premature quit the sub-function, press short the

UL- or LL-button.

5. 1 Upper display indications

Main functions are chosen with UR-button, sub-functions with UL-

button. To better distinguish main functions from sub-functions,

main functions are printed in a bold script and sub-functions are

printed in a bold, cursive script.

Speed

(only in Bike mode and Ski mode)

Indicates the current speed in km/h

(or mph = miles per hour).

Following applies only in Ski mode: Calculates

the speed out of the current decreasing (dis-

played speed can vary up to ±10% ; the more steeply or levelly the

slope, the more can the value vary).

Range: 0 - 199,9 km/h or 124,2 mph

Average speed

(only in Bike mode and Ski mode)

Sub-function of function ‚Speed‘.

Indicates the average speed

(of the bike adjusted).

Range: 0 - 199,9 km/h or 124,2 mph

Total average speed (bike 1 and bike 2)

(only in Bike mode and Ski mode)

Sub-function of function ‚Speed‘.

Indicates the calculated average speed of bike

1 and bike 2.

Range: 0 - 199,9 km/h or 124,2 mph

Maximum speed

(only in Bike mode and Ski mode)

Sub-function of function ‚Speed‘.

Indicates the maximum speed reached with the

adjusted bike.

Range: 0 - 199,9 km/h or 124,2 mph

Maximum speed bike 1 or bike 2

(only in Bike mode and Ski mode)

Sub-function of function ‚Speed‘.

Indicates the absolute maximum speed

reached and also the bike with which it was

achieved.

Range: 0 - 199,9 km/h or 124,2 mph

Current heart rate

Setting range: 30 to 240 bpm

(beats per minute; if value is over 200, the last

digit is displayed on the comma digit of the

upper display)

Indicates the current heart rate.

Note: Heart rate functions can only be indicated with the HAC

, if the accompanying transmitter belt is worn.

The heart rate functions have an energy-saving mode: if no signal is

received within a period of approx. 5 minutes, the heart rate receiver

of the HAC switches off automatically (symbol ‚heart‘ in the

display disappears). To reactivate the heart rate receiver , choose

again the function ‚Current heart rate‘ in the display.

Average heart rate

Sub-function of function ‚Current heart rate‘

Indicates the average heart rate.

Range: 30 to 240 bpm

Maximum heart rate

Sub-function of function ‚Current heart rate‘

Indicates the maximum heart rate.

Range: 30 to 240 bpm

Recuperating heart rate

Sub-function of function ‚Current heart rate‘

Indicates the recuperating heart rate (see

chap. 6.3).

Recuperating heart rate is the heart rate

measured 3 minutes after the recuperating

heart rate function is started (press UL- and

LL-button short and simultaneous). After 3 minutes a short signal

tones, when the measuring ends. The display indicates the heart

rate measured at start of this function and below the recuperating

heart rate (measured after 3 minutes).

Range: 30 to 240 bpm

Current ascent / descent

(only in bike mode)

Indicates the current ascent or descent ridden

at the moment (in %). The arrow on the right

side of the display indicates if an ascent or a

descent is measured.

Range: 0% to 99%

Note: Technically restricted the correct value is indicated a few

seconds after the beginning of the ascent/descent.

After stopping (speed = 0) the last value remains in the display.

Average ascent

(only in bike mode)

Sub-function of function ‚Current ascent/des-

cent‘

Indicates the average ascent of the current tour.

Range: 0% to 99%

Average descent

(only in bike mode)

Sub-function of function ‚Current ascent/des-

cent‘

Indicates the average descent of the current

tour.

Range: 0% to 99%

Maximum ascent

(only in bike mode)

Sub-function of function ‚Current ascent/des-

cent‘

Indicates the maximum ascent of the current

tour.

Range: 0% to 99%

Maximum descent

(only in bike mode)

Sub-function of function ‚Current ascent/des-

cent‘

Indicates the maximum descent of the current

tour.

Range: 0% to 99

Current gain or loss in altitude

(Variometer function)

Indicates the current gain or loss in altitude in

meters/ft x10 per minute. The arrow on the

right side of the display shows if it is an ascent

or a descent.

Range: 0 to 199 m/min resp. 0 to 65 ft x10/min

Note: Technically restricted the correct value is indicated a few

seconds after choosing this function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo HAC 4 Pro Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo HAC 4 Pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info