Bedienungsanleitung Ciclo HAC 4 Pro (Seite 9 von 15) (Englisch)

588929

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Average gain in altitude

Sub-function of the function ‚Current gain or

loss in altitude‘.

Indicates the average gain in altitude since the

beginning of the tour.

Range: 0 to 199 m/min

resp. 0 to 65 ft x10/min

Average loss in altitude

Sub-function of the function ‚Current gain or

loss in altitude‘.

Indicates the average loss in altitude since the

beginning of the tour.

Range: 0 to 199 m/min

resp. 0 to 65 ft x10/min

Note: The time needed to reach the next mountain peak or valley

can be calculated with the help of these two functions. For this

multiply the indicated value with 60, so you get the meters (or ft) in

altitude reached in 1 hour.

Maximum gain in altitude

Sub-function of the function ‚Current gain or

loss in altitude‘.

Indicates the maximum gain in altitude since

the beginning of the tour.

Range: 0 to 199 m/min

resp. 0 to 65 ft x10/min

Maximum loss in altitude

Sub-function of the function ‚Current gain or

loss in altitude‘.

Indicates the maximum loss in altitude since

the beginning of the tour.

Range: 0 to 199 m/min

resp. 0 to 65 ft x10/min

Amount of ascents

Sub-function of the function ‚Current gain or

loss in altitude‘.

Indicates the amount of ascents since the

beginning of the tour.

Range: 0 to 199.

Amount of descents

Sub-function of the function ‚Current gain or

loss in altitude‘.

Indicates the amount of descents since the

beginning of the tour.

Range: 0 to 199.

Note: The HAC counts the amount of ascents or des-

cents only when the altitude difference is at least 50 m, this function

is primarily for skiers and downhill-bikers (also persons who use

ski-lifts).

Temperature

Indicates the current temperature . The tem-

perature can vary if the HAC4 is worn on the

wrist, due to the body temperature.

Range: -20 to +60 °C resp. – 20 to +140°F

Minimum temperature

Sub-function of the function ‚Temperature‘.

Indicates the lowest temperature measured

during the tour.

Range: -20 to +60 °C resp. – 20 to +140°F

Maximum temperature

Sub-function of the function ‚Temperature‘.

Indicates the highest temperature measured

during the tour.

Range: -20 to +60 °C resp. – 20 to +140°F

5. 2 Lower display indications

Main functions are chosen with LR-button, sub-functions with LL-

button. To better distinguish main functions from sub-functions,

main functions are printed in a bold script and sub-functions are

printed in a bold, cursive script.

Time

Indicates the current time.

Range: 00:00 - 23:59 or 00:00 - 12:59 AM/PM

(in case of AM the colon is blinking)

Date

Sub-function of the function ‚Time‘.

Indicates the current date (leap years are con-

sidered). With 24-hour display in the format TT

MM (Day/Month), with 12-hour display in the

format MM TT (Month/Day).

Year

Sub-function of the function ‚Time‘.

Indicates the current year.

Stopwatch

To start/stop the stopwatch press the start/

stop-button short.

To reset the stopwatch to zero (and therewith

reset all intermediate and lap-times) press

start/stop-button 3 sec.

Range: 0 – 999:59 (up to 10 minutes display

shows m:ss:1/100 – with the second colon blinking; up to 10 hours

h:mm:ss , 10 hours and more hhh:mm)

Intermediate time/lap time

Press short LL-button

Sub-function while running stopwatch:

Stops the current intermediate time and the

current lap time, thereby the HAC

indicates for 3 sec. the current intermediate

time and then for 3 sec. the lap time. Up to 100 intermediate times

and lap times can be stopped and stored.

Intermediate time is the time since starting of the stopwatch, lap time

is the time since last stopping of intermediate time/lap time.

Range: 0 – 999:59 (up to 10 minutes display shows m:ss:1/100

– with the second colon blinking; up to 10 hours h:mm:ss, 10 hours

and more hhh:mm)

if stopwatch is not running:

Indicates the stored intermediate times and lap

times (with the accompanying counter).

It first indicates the stored intermediate time,

after 3 sec. display changes to the lap time.

With again short pressing LL-button the next

intermediate/lap time is indicated and so on.

Range: 0 – 999:59 (up to 10 minutes display shows m:ss:1/100

– with the second colon blinking; up to 10 hours h:mm:ss, 10 hours

and more hhh:mm)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo HAC 4 Pro Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo HAC 4 Pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info