Bedienungsanleitung DRU GLOBAL 100 BF (Seite 37 von 64) (Holländisch)

571711

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

English

INSTALLATION MANUAL

Global 100 BF

Proceed as follows, when placing the control box; see ﬁ g. 4

for details:

• Make an opening in the chimney breast of 285 x 194 mm

(h x w).

• Place the inner frame (1); unscrew bolts (5) for this.

!Tip - When the chimney breast is made of

bricks, the inner frame can be built with

bricks at the same time;

- When using a different material, you can

glue the inner frame or ﬁ x it with four

ﬂ ush screws.

• Mount the gas control to the brackets of the inner

frame (2).

• Reconnect the pipes to the gas control.

- Avoid kinks in the pipes;

- Place the aluminium pilot burner pipe

free from the ﬂ oor and / or the wall;

- Tighten the ﬂ exible gas pipe and the pilot

burner pipe until they are gastight.

The pilot burner pipe must be protected

against possible corrosion inﬂ uences, e.g.

moisture, falling cement, dirt falling down

from a chimney, etc. The pilot burner pipe

must be permanently kept free from the

ground and walls of the room in wich the

appliance is built.

• If applicable, connect the wires of thermocouple 1 to the

gas control; see ﬁ g. 5.

- First tighten the thermocouple by hand

and;

- then tighten it a quarter turn using a

suitable spanner.

• If necessary, blow clean the gas pipe.

• Connect the gas pipe to the gas tap.

• Bleed the gas pipe.

• Place the receiver (3); for connections, see section 7.1.

• Place the data plate (6).

• Fix the outer frame with door (4) to the inner frame

using 2 socket cap screws.

!Tip You can place the outer frame in such a

way, that the door turns to the left or to

the right.

• If necessary, mount the control panel of the Max vent

system in the control box; see the manual for the Max

vent system.

6.8 Adjusting the appliance

The appliance has to be set in such a way that it works cor-

rectly in combination with the concentric system.

For that purpose, a bafﬂ e is placed and/or the air inlet

guides are removed. The conditions for using a wall terminal

are described in section 6.5.2.1, and for using a roof termi-

nal in section 6.5.3.1.

6.8.1 Bafﬂ e (R)

The bafﬂ e (R) is supplied separately.

This is mounted as follows (see ﬁ g. 6):

• Place the bafﬂ e.

• Use the template supplied to set the distance of the

restriction (see ﬁ g. 7).

• Fix the bafﬂ e by using the self-tapping screw (U).

6.8.2 Air inlet guide (L)

One air inlet guide L is located at the back side under tray

M, two air inlet guides L are located left and right on top of

tray M.

If you want to remove it, proceed as follows; see ﬁ g. 8:

• Take the tray surrounding the burner out of the appliance.

• Unscrew the self-tapping screws (N) and remove them.

• Remove the air inlet guide.

• Fit the tray surrounding the burner back in the appliance.

6.9 Placing the wood / pebble set

The appliance is supplied with a wood or pebble set.

Strictly observe the following instructions

to prevent unsafe situations:

- only ever use the supplied wood / pebble

set;

- place the wood / pebble set exactly as

described;

- make sure the pilot burner and the space

around it are kept free from objects

(see ﬁ g. 9 and 9a);

- make sure that thermocouple 2 and the

space around it are kept free from

objects (see ﬁ g. 10 and 10a);

- make sure that the slot between the

burner tray and the tray surrounding the

burner is kept free from objects;

- make sure there is no vermiculite’s ﬁ ne

dust on the burner.

6.9.1 Wood set

The wood set consists of black vermiculite (see ﬁ g. 11),

chips (see ﬁ g. 12) and a number of logs.

• Fill the burner tray with vermiculite; equally spread the

vermiculite.

!Caution - You can inﬂ uence the ﬂ ame image by

moving the vermiculite, yet

- the burner deck has to remain covered

with vermiculite in order to prevent that

the life expectancy of the burner is

reduced.

• Identify logs A up to H by using ﬁ g. 13a.

Caution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DRU GLOBAL 100 BF Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DRU GLOBAL 100 BF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info