7
Programming procedure of BPT37
- Push the button, and choose the PROG mode with the buttons.
Push to confirm.
- Push the buttons to choose the program you want to set (Pr1 to Pr9).
- Push the buttons to set the temperature change start point – the minimum
step is 10 minutes.
- Push the button to assign a required temperature to the given time; the step
is 0,5°C.
- After setting the first time and temperature, push the button to confirm.
- Automatically, you will move on to the second time and temperature setting for the
same day, which is indicated by the symbol on the last, sixth line.
- Continue in the same way until you set the last (sixth) interval.
- Pushing the button, you automatically move on to the next day setting, where
you can proceed in the same way.
i
i
2
i
+/- T
+/- H
+/- P
+/- TFce
Copying days in the PROG mode
- The day indicator must be on the day you want to copy to the next day.
- Push the button; the program will automatically be copied to the next day and the day indicator
(1st line of the display) shifts to the next day.
Kopi
Even / odd week selection in the PROG mode
If you have set the Pr1 and Pr2 programs, you can specify which one should be active in even or odd
weeks. After this setting, programs will automatically alternate every week in the AUTO mode (suitable
when working shifts).
- Push the button, and choose the PROG mode with the
buttons. Push to confirm.
- Push the buttons to choose the Pr1 program
- Push the button and enter the week in which the program will be
active L = odd, U = even, 1= unspecified
- The Pr2 program will be specified automatically.
i
+/- P
+/- TFce
Programs preset by default
The Pr3 to Pr9 programs are preset by default; they can, however, be changed, as necessary, like Pr1
and Pr2 (example: 5/21 means the required temperature of 21 °C at 5 o’clock.)
Info:
If you do not use all 6 options for one day, move on to the next day by repeatedly pushing the
button or button.
Den
i
