Bedienungsanleitung Ferm MSM1033 (Seite 8 von 56) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

510117

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

8 Ferm

use a damp cloth for cleaning.

38. Do not use saw blades which are damaged or

deformed.

39. Replace table insert when worn.

40. Use only saw blades recommended by the

manufacturer.

41. Take care that the selection of the saw blade

depends on the material to be cut.

42. Connect circular saws to a dust-collecting

device when sawing.

43. Use and correct adjustment of the riving knife

44. Use and correct adjustment of the upper saw

blade quard.

45 The dust that is emitted when sawing certain

types of wood can be toxic, i.s. oak, birch, ash,

beech and fibreboard. Certain dust, from

tropical wood types such as rosewood, coco

bolo and afzelia, cause cancer when breathed

in regularly. Ensure therefore that you have

good dust suction installed with a device that

fulfils the following requirements:

• Tube must fit perfectly on the connection

element

• Suction volume must be larger than 550 m3

per hour

• Vacuum at connection more than 740 Pa

• Air speed at connection more than 20 meters/

second

Ensure that the least possible wood dust is

released in the atmosphere. WIPE wood dust

away (do not blow away with pressured air),

repair leaks in the tubes and ensure

appropriate ventilation.

Do not use saw blades which are damaged or

deformed.

Always clamp or press the workpiece firmly

against the saw guide, before you carry out

the process.

Do not modify the machine; unauthorised

parts have not been tested and approved.

Mainly use:

• No unauthorised saw blades

• No unauthorised safety systems 7

• Always use the supplied safety systems!

• Always use a cavity blade for scalloping.

46 Wear ear protectors. The following facors can

be of influence in producing noise

• The kind of material to be cut

• The sawblade

• The force of which the workpiece is fed

Loud noise can lead to hearing damage.

Ensure that you wear ear protectors.

Ensure that the cavity blade is not bent,

this can also cause noise.

47 Residual risks

The following risks are inherent to the use of

these machines:

• Injuries caused by touching the rotating parts

• Injuries caused by disruption of the cutting

blade

• These risks are most evident:

• Within the range of operation

• Within the range of the rotating machine parts

In spite of the application of the relevant

safetyregulations and the implementation of

safety devices, certain residual risks cannot

be avoided. These are:

• Impairment of hearing.

• Risk of accidents caused by the uncovered

parts of the rotating cutting blade.

• Risk of injury when changing the blade.

• Risk of squeezing fingers when opening the

guards.

3. Assembly and accessories

Installation of the mitre saw

• Place one extension piece on the right-hand

side of the machine and the other extension

piece on the left-hand side of the machine.

• Loosen the locking bolts and slide the guide

rods in the openings.

• Tighten the locking bolts again.

• Place the work piece clamp on the left or right

side of the machine.

• Hold the handgrip and move the saw slightly

downwards and then pull the pin out slightly so

that the machine comes free.

Note: Never use the mitre saw without the

extension pieces supplied. Make sure that they

are correctly mounted.

Mounting the support bracket.

• Mount the support bracket into the slot in the

rear of the base.

• Tighten the screw to secure the support

bracket.

Installation of the machine on a workbench or

on the subframe.

This machine is a stationary machine and for

safety reasons must always be firmly installed and

not used for mobile applications.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1033 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info