Bedienungsanleitung Festool DSC-AG 125 (Seite 20 von 126) (Alle Sprachen)

778812

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

or brush may expand in diameter due to work

load and centrifugal forces.

Further safety instructions

-The machine may not be used in damp and wet

spaces, outdoor when it is rainy, foggy or snowy

or in the explosive environment.

-Before use always inspect the ﬂ exible lead and

the plug. Have the defects repaired by a spe-

cialist repair shop.

-Outside the premise use only approved exten-

sion leads and cable connections.

-Apply the machine to the material only when

switched on.

-Do not carry the machine by the lead.

-Do not work on a ladder.

-When operating the tool, use protective gloves

and tough footwear.

-When operating the tool, use goggles and ear

protectors.

-The dust generated during work is harmful to

health. When operating the tool, use the dust

extraction system and the respirator.

-Materials containing asbestos can only be pro-

cessed by qualiﬁ ed individuals. Comply with the

safety regulations that apply in your country.

-Flexible power supply cable always route from

the tool backwards.

-Only use milling rings recommended by the

manufacturer.

-The machine is only allowed be used when pro-

tective guard is in place and additional handle

is fastened.

-Plug in the ﬂ exible power supply cable’s plug

into the wall socket when the machine is off.

-Make yourself sure whether the material that is

going to be machined does not contain electric,

water or gas lines – an injury could occur.

-Do not mill over metal objects, nails or screws.

-The machine is not allowed to be operated by a

person under 16 years of age.

-Only for AS/NZS: The tool shall always be sup-

plied via residual current device with a rated re-

sidual current of 30 mA or less.

-Do not use quick-change nuts for clamping the

disc.

-When clamping, be careful about the direc-

tion of rotation marked on the label and/or the

diamond tool, which must be the same as the

direction of the actual rotation of the machine

used.

-The ﬂ ange and fastening nuts must be properly

tightened.

-Use a tool with speciﬁ cations suitable for the

worked material – cf. the information on the

diamond tool and its packaging.

-Put the diamond disc vertically to the cut.

-Always apply oscillating cuts to let the disc cool

down and prevent overload of the diamond disc.

-After several cuts or intensive cutting make a

cool-down break to prevent overheating of the

diamond tool.

-Avoid mechanical damage to the diamond tool,

whether by force, impact or heat.

-Do not use a diamond cutting disc for grinding.

Do not apply a lateral pressure on a diamond

cutting disc.

-Diamond tools are self-sharpening. A blunt tool

is recognised by reduced cutting power and a

circular “ﬁ re” edge. Short cuts into abrasive

materials (limestone/sandstone bricks, asphalt

or gas concrete) may sharpen a blunt tool. Spo-

radic sparks while cutting stone are typical and

do not mean a critical problem.

6 Emission levels

Measured values determined according to EN

60745.

Typically the A-weighted noise level of the tool

are:

Sound pressure level: 90 dB (A)

Sound power level: 101 dB (A)

Inaccuracy of measurement K = 3 dB (A)

CAUTION

Operating noise

Damage to hearing

Use ear protection!

Measured values determined according to EN

60745.

Vibration emission value ah = 4,0 m/s²

Inaccuracy of measurement K = 1.5 m/s²

The speciﬁ ed emissions values (vibration, noise)

-are used to compare machines.

-They are also used for making preliminary esti-

mates regarding vibration and noise loads dur-

ing operation.

-They represent the primary applications of the

power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool DSC-AG 125 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info