Bedienungsanleitung Gastroback 40977 (Seite 58 von 65) (Deutsch, Englisch)

714637

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

EN EN

114 115

REMOVING AND DISASSEMBLING THE MINCER

1. Switch off the machine (press the control dial) and unplug (see above: ‘Switching

Off the Machine’).

2. Remove the tablet of the mincer. Then, gasp the mincer with your right hand

and, while holding the release button pressed with your left hand, turn the mincer

clockwise. Then pull the mincer out of the mincer coupling at the mixing arm.

3. Ensure that the mincer coupling within the mixing arm is clean and dry. If

required, wipe the mincer coupling using a soft, and only slightly damp cloth for

removing any residues of food. Then whip dry thoroughly.

4. Ensure that the mincer coupling is completely dry. If so, place the cover onto the

mincer coupling and turn the cover counter-clockwise for locking it in place.

IMPORTANT - We recommend to disassemble the mincer over a large bowl made

of metal or unbreakable plastic. DO NOT use a bowl or dish made of fragile

material (e.g. china or glass). After using the mincing tools, ensure to touch the

cross blade with care to avoid cutting your hand.

5. Unscrew the screw ring from the mincer housing.

6. Hold the outlet of the mincer housing over an unbreakable bowl and shake out

the worm shaft and used accessories. If required, press the worm shaft out of

the mincer housing by pressing on the hexagonal shaft at the coupling side of

the mincer housing.

7. Clean all used parts of the mincer immediately thereafter (see: ‘Care and Cleaning’).

SOLVING PROBLEMS

If any problems occur during operation, you will find solutions in this chapter.

Problem Reason Easy solution

Emergency stop required? Unplug the machine.

General problems

You cannot switch on the

machine, the display areas

stay dark.

The stand mixer is not

live.

Check, whether the power plug is connected correctly to

a sufficient power supply (see: ‘Technical Specifications’).

Check, whether the power outlet is live by connecting a

lamp. Is the power cord damaged? Contact your vendor.

The mixing arm is in the

upper position.

Lower the mixing arm to the operating position.

2. Unplug the machine, if you do not wish to start operation again and before

assembling or disassembling any parts or cleaning the machine.

REMOVING THE MIXING TOOLS

WARNING – Do not hold your hands or any objects (e.g. cooking utensils or

brushes) onto the mixing tools, while the machine is connected to the power sup-

ply. Do not hold your hand into the joint between the mixing arm and the back

pillar of the stand mixer to avoid crushing your hand.

IMPORTANT - Always hold the mixing arm tightly by the handle, when raising or

lowering the mixing arm. Additionally, the mixing arm is very heavy and may not

fall down from the upper position to avoid damage. Always lower the mixing arm

slowly into the operating position.

1. Switch off the motor (press the control dial) and unplug the machine. Remove the

splash guard.

2. Tightly grasp the mixing arm at the front. Then press the unlock button, while

moving the mixing arm up. Release the unlock button and ensure that the mixing

arm is engaged securely in the upper position.

3. Hold the mixing arm at its topside, while pushing the shaft of the mixing tool

upwards until you can turn the mixing tool easily clockwise (to the right).

4. Remove the mixing tool now by pulling it gently downward.

5. Repeat the steps 3 and 4, if both kneading tools have been installed.

6. Grasp the mixing bowl with both hands and turn the mixing bowl clockwise until

you can remove the mixing bowl from the base plate. Remove residues of food

sticking to the mixing tool and inner walls of the mixing bowl.

NOTE

You may use the scraper beater for scraping food off the mixing bowl.

7. Tightly hold the mixing arm by the front and press the unlock button. Ensuring

to keep your hand away from the joint of the mixing arm, lower the mixing arm

gently down until it locks into the horizontal (operating) position.

8. Clean the machine and all used accessories immediately after usage. Do not

leave food dry on the surfaces (see: ‘Care and Cleaning’).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gastroback 40977 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info