Bedienungsanleitung Gastroback 40977 (Seite 59 von 65) (Deutsch, Englisch)

714637

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

EN EN

116 117

Problem Reason Easy solution

The machine is live with

the displays illuminated

but the motor does not

work.

The machine is not swit-

ched on. Only dashes are

displayed.

Press the control dial for approx. 2 seconds until a beep

sounds. “00” flashes on the speed display and the timer

shows the maximum operating time “20:00”. Then try

again.

The operating timer has

been set to “00:00”,

when you attempted to

select a speed.

Select an operating time between 30 seconds (“00:30”)

and 20 minutes (“20:00”), before selecting a speed.

Simply try again.

The set operating time has

elapsed.

When the count-down of the operating time reached

zero, the motor is switched off automatically, and

the speed and operating time are reset to defaults. If

required, select a speed again.

You let the motor work in

continuous operation for

more than 10 minutes.

The overheat protection

is active.

Unplug the machine and leave the machine cool down

for at least 20 minutes, before starting operation again.

Process your food in smaller portions. Do not let the motor

agitate in continuous operation for more than 10 minutes.

If a longer operating time is required, make a break of 5

minutes after each 10 minutes of operation.

The motor is blocked

and/or the overload pro-

tection is active.

Unplug the machine and remove the obstacle. Chop or

grind very hard ingredients (e.g. nuts). Remove extreme-

ly hard parts of your food thoroughly (e.g. bones, gristle,

seeds), before processing the food. Leave the machine

cool down for at least 20 minutes, before starting ope-

ration again.

The used tool is damaged. Immediately unplug the machine. Ensure that all used tools

are undamaged, before switching on the machine. Bent or

broken tools must be replaced. Contact your vendor. The

machine is not suited for chopping or grinding

very hard types of food (e.g. nuts). For mincing

solid pieces of food like meat, use the mincer (see: ‘Using

the Mincer’). Always select the tool set, which is suited

best for the desired task (see: ‘Tips for Best Results’).

You cannot adjust the

operating time.

The motor is running. When a speed is selected and the motor is running, the

operating time cannot be changed and the arrow keys are

inactive. Turn the control dial to zero, for cancelling the cur-

rent operation. Then try again.

Problem Reason Easy solution

The pause function is acti-

vated.

With the pause function active, the operating time cannot

be changed and the arrow keys are inactive. You need to

cancel operation completely for setting a new operating

time. Turn the control dial to zero. Then try again.

The machine is moving

around on the working

surface during operation.

Vibrations, caused by

executing a mixing task.

During stirring and kneading the machine may vibrate

vigorously, depending on the consistency of the food and

selected speed. These vibrations could make the machi-

ne move around. This is normal. Always supervise

the machine during operation, especially when

kneading heavy dough.

The machine is placed on

an insufficient or inclined

surface.

Do not place the machine on any clothes or napkins. Only

place the machine on a stable, level, and smooth work

surface. Otherwise, the suction cups at the feet of the

machine will not have sufficient support for ensuring a sta-

ble stand.

Liquids or powders stick

to the suction cups of the

machine.

The work surface of the machine must be clean and dry.

Otherwise, the suction cups at the feet of the machine will

not have sufficient support for ensuring a stable stand. Cle-

an the work surface and suction cups (see: ‘Care and Clea-

ning / Cleaning the Housing’).

The machine beeps repea-

tedly, the bowl illuminati-

on flashes.

The machine is connected

to the power supply, while

the mixing arm is in the

upper position.

Always unplug the machine, before moving the mixing

arm to the upper position.

The motor reaches the

selected speed only

slowly.

The smart motor control

prevents the motor from

starting in a jolt.

This is intended for minimizing splashes and dust clouds.

Wait until the motor reaches the set speed.

During operation the

motor stops immediately.

The set operating time

elapsed. At the display

areas “00” and “20:00”

are shown.

The motor stops automatically, when the selected opera-

ting time is reached. If required, turn the control dial for

selecting a speed.

The motor has been run-

ning for a too long time.

The overheat protection

is active.

Unplug and leave the machine cool down for approx. 20

minutes. Then try again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gastroback 40977 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info