Bedienungsanleitung Gorenje HEC50EP (Seite 16 von 26) (Englisch)

512706

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Instructions for use and connection

goes off and the display (d4-6) indicates the

correct daily time.

Changing the current daily time

The time of day may be changed at any time

(except in case of activated end of operation

mode (d4-2) is on) by doing the following:

• Touch the selection sensor (4) and select the

current time selection mode ((d4-5) is flashing).

• by means of sensors 4a/4b set the current time

(symbol (d4-5) and the time displayed are

flashing (d4-6))

• after 5 seconds the display indicates (d4-5)

correct current time (symbol (d4-5) goes off).

• in case of power failure shorter than 1 minute,

the current daily time remains unchanged.

Oven illumination

• When the oven is on, the lamp is also on,

regardless of the operation mode.

• If the oven is off, touch the sensor (1) and

select the symbol "Light" (1), then touch the

light ON/OFF sensor (5) turn the lamp on. Next

touch of the ON/OFF sensor turns the lamp off.

Selection and setting of oven

temperature

After selecting the type of food and oven function

mode, by pressing the sensors (3a/3b) you may

select the desired oven temperature in the range

from 30 – 250°C (depending upon the selected

operation mode) in 5°C intervals.

During the operation, oven temperature may

be randomly increased or decreased within

the permitted temperature range (see chart)

by pressing the sensors (3a/3b).

Table of data for operation mode (with a sensor 2)

Operation mode

Preset

temperature (°C)

200 160 200 170 250 160 160 150 -

Preset time

(h/min)

---------

Possibillity of max.

set temperature (°C)

250 250 250 250 250 220 220 200 -

Oven thermostat signal lamp (d3-2)

• Signal lamp is on; oven temparture is below the

setting and the oven is heating.

• Signal lamp is off; the temperature in the oven has

reached the set temperature.

• Signal lamp is flashing regularly; the oven is set to

the end of operation mode with the adequate

sensor (d4-2); the preparation of food has not

started as yet (the appliance automatically

computes the relevant moment of starting the

oven operation).

Setting the operation time

• The time of oven operation may be selected in the

range from 0 to 6 hours, in 1 minute intervals.

• After selecting the function mode and the

temperature, by pressing the sensor 4 you may now

select the operation time from 0 to 6 hours, in 1

minute intervals.

• Touch the selection sensor (4), the display

(d4-1) starts flashing. By touching sensors (4a/4b)

set the desired operation time.

• Turn the oven on with the ON/OFF sensor (5).

• When the set time has elapsed, the oven is

switched off (signalled by the beep, oven operation

time symbol (d4-1) and the relevant signal lamp

(5a) are flashing).

• By touching any sensor (except the ON/OFF sensor

(5), which turns the sound signal off and switches

the oven on) you may switch the sound signal off,

otherwise it is turned off automatically after 7

minutes.

Oven operation time may be changed during

the operation.

Setting the end of operation time

• This function is used when you wish to select

the end of operation (cooked food) at exactly

the pre-selected time.

• The function may be used only with previously

set time of operation ((d4-1) is on).

• By touching the selection sensor (4) symbol

(d4-2) flashes, and the display (d4-6) flashes

the sum of daily current time and the oven

operation time. Use the sensor (4a) to set the

desired end of oven operation.

• Switch the oven on with the ON/OFF sensor

(5). The appliance awaits the start of operation

(oven thermostat signal lamp symbol flashes

regularly (d3-2), oven operation time symbol is

on (d4-1) and end of operation time symbol

(d4-2) is also on.

• The starting time is now defined automatically.

At the moment the oven starts the operation,

the end of operation symbol (d4-2) goes off,

oven illumination is on, and the oven thermostat

signal lamp (d3-2) is on until the set

temperature is reached.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje HEC50EP Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info