326973

Gorenje k 7708 e Seite 13

13
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
179732
Instructions for use, installation and connection
14
fuse or switch off the main switch), then reconnect it to the
mains and set the correct daily time.
Program clock display is flashing…
There was a power failure, or the cooker had been connected
to the mains for the first time. All settings are erased. Set the
correct time of day to be able to activate the oven.
After operating in automatic mode, the oven switches off, the
display indicates time, and the beep is heard. Take the food
from the oven, set the temperature selection knob and the
mode knob into their original positions. Select the "Manual
mode", and use the oven in a conventional mode (without
programming).
Signal lamp does not turn on....
• are all the required switches properly activated?
• is the mains power fuse burned?
• is the temperature regulator properly set?
Fuses often burn out...
• Call the serviceman or your electrician!
Oven illumination is not on....
• Exchange of oven bulb is described in the section
"Replacement of parts".
Oven does not heat up...
• is the mains power fuse burned?
• is the temperature regulator set correctly?
Baking results are disappointing...
• did you remove the grease filter?
• did you follow the instructions and warnings from the section
"Baking"?
• did you strictly follow the information from the Baking table?
Burners do not burn uniformly…
• Gas serviceman should check the gas settings!
Burner flame suddenly changes, burners require excessive
ignition time…
• Assembly the burner components correctly!
Flame goes off immediately after ignition…
• Keep the button pressed somewhat longer.
• Push firmly once more before releasing the button.
Burner grid has changed color in the burning area…
• This is a normal consequence of high temperature; clean the
grid with metal cleaner.
Electric ignition of gas is malfunctioning, burner covers
are dirty…
• Carefully clean the gap between the ignition spark and the
burner.
• Clean the covers with a metal cleaning agent.
Replacement of parts
The oven light bulb casing is under tension. Danger of
electric shock!
Before replacing the oven bulb switch off the cooker and cut it
from mains by removing the mains power fuse or disconnect
the protective device.
Remember that the bulb is regarded as consumption material
and is not covered by the warranty.
Other accessories
Oven grid, biscuit tray, etc. may be ordered from the service
center. When ordering please quote the code and the type or
model of the appliance.
Hotplate control knobs are removed by pulling them outwards
and replaced by pushing the new ones back in place.
Oven light bulb
The bulb for replacement
should meet the following
specifications:
E 14, 230 V, 25 W, 300°C.
Unscrew the glass
cover by turning it counter
clockwise, and replace the
bulb. Screw the glass cover
back in place.
Glass cover of side lamp can
be easily
removed by the screwdriver
(see the drawing).
Remember that the bulb is
regarded as consumption
material and is not covered
by the warranty.
Instructions for installation and connection
Safety precautions for the technician
Installation may be carried out in accordance with the standing
regulations. It is extremely important to ensure adequate air
circulation.
Safety precautions
• Connections must be carried out only by the expert
personnel, authorized by the gas distribution company.
• Provide regular air circulation in the room where the
appliance is located.
• Gas arrangements are specified on the sticker adjacent to
the rating plate.
• Before connecting the appliance check that the local
connection requirements (gas pressure and type) match the
features of the appliance.
• The appliance may not be connected to the fumes exhaust
device (for example to the chimney). It must be located and
installed in accordance with the standing installation and
connection regulations. Special attention should be devoted
to the ventilation requirements.
• Distance between the cooktop and the kitchen hood must be
at least the distance, indicated in the instructions for use of
the kitchen extraction hood.
• The appliance is classified Class 2/1. When positioned in a
row it may be located adjacent to a high kitchen cabinet.
Horizontal distance to high cabinet or to the wall must be at
least 300 mm.On the other side it is permitted to have only
… 13 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gorenje k 7708 e wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info