Bedienungsanleitung Gossen Metrawatt SECULIFE ST HV (Seite 37 von 72) (Englisch)

590775

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

GMC-I Messtechnik GmbH 37

•Perform function test if required:

The function test can be performed each time a safety test has been

successfully completed. The blinking signal lamp indicates that the

function test should be started. Beyond this, the function test can also

be started from the Function Test selector switch position. See chapter

14 on page 34 regarding performance of the function test.

•Display test results

(the worst measured values for the respective test sequence)

• Save test results and print if required

15.2 Setting Up Test Sequences

The order of a test sequence cannot be changed!

However, it is possible to change limit values and measuring parameters,

and test steps can be added or skipped.

Principally, two test sequences are distinguished which are described on

the following page:

• Sequence 1 (repair tests and periodic tests)

• Sequence 2 (type tests)

Settings for the Test Sequence

Settings for the test sequence are not stored under a type designation,

but apply generally for the preset sequence of the respective test stan-

dard.

Type-related Settings (Type*)

(for tests per EN 60950, EN 61010 and EN 60335 only)

The type-related settings only include limit values. These limit values can

be stored for each type under an individual type designation. Measure-

ments the limit values of which have been deleted are skipped.

A type can be stored as default type. This type is indicated if the rotary

switch is set to Auto.

If no default type has been stored, the following appears for type in the

Auto rotary switch position: GENERAL and the general limit values of the se-

lected test standard apply.

Overview of adjustable measuring parameters (see chapter 15.3 for their meaning)

Adjustable measuring

parameters for test

sequences according

to standard

DIN VDE 0701

Part 1

DIN VDE 0701

Part 240

DIN VDE 0701-0702

DINEN60950

DINEN61010

DINEN60335

IEC 62353

IEC 601/EN 60601

can be stored

under

Measuring parameters of the initial program window

To test socket •••••••• —

Adapter for socket •••••••• Test standard

(safety) class •••••••• —

Ext. Cable WITH EL1 • — • ————— Test standard

Combined Testing — • —————— Test standard

R-INS LN-PE —— • ————— Test standard

AP-Type —————— •• Test standard

Limit values ••••••••Test standard (Type)

Type •∗ •∗ •∗ • • Type

Measuring parameters in the Test Cond. menu (test conditions)

R-INS LN-PE ——————— • Test standard

R-INS AP-PE ——————— • Test standard

HV test ——————— • Test standard

Patient Auxiliary Current

——————— • Test standard

Measuring parameters in the Setup menu

Visual inspection •••••••• Test standard

Manual sequence •••••••• Test standard

Autostore •••••••• Test standard

Mains polarity reversal •••••••• Test standard

Classification •••••••• Test standard

SK III U

•••••••• Test standard

R-INS LN-PE ••— ••••— Test standard

HV test ——— •••— — Test standard

HV test duration ——— •••— — Test standard

Auto (test) method •••——— • — Test standard

R-PE AC > 10 A • — •••••• Test standard

R-PE with clip ——————— • Test standard

No I HL for SC I ——————— • Test standard

Mains wait •••••••• Test standard

First measured values

—————— • — Test standard

R-INS AP-PE —————— • — Test standard

See chapter 8 for device parameters in the test sequence

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gossen Metrawatt SECULIFE ST HV Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info