Bedienungsanleitung Graupner MX-16 HoTT (Seite 41 von 200) (Englisch)

467107

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Using the transmitter for the ﬁrst time - Updating the ﬁrmware

transmitter battery before you carry out any up-

date. For safety’s sake recharge it and back up

all occupied model memories, so that you can re-

store them if anything goes wrong.

The connection between the transmitter and the •

PC or laptop must not be interrupted during the

update process, so please ensure that there is re-

liable contact between the transmitter and the

computer.

Unpacking the program package1.

Unpack the ﬁle “HoTT_Software_VX.zip” into a con-

venient folder. For example, you might name the fold-

er “HoTT_Software_VX”, the “X” standing for the cur-

rent version number.

Installing the driver2.

If you have not already done so, install the driver soft-

ware which is included in the program package in the

“USB driver” folder; this is necessary in order to use

the transmitter’s integral USB port.

Start the driver installation by double-clicking on the

corresponding ﬁle, and follow the instructions. Af-

ter a successful installation the computer will need to

be restarted. Note that the driver only has to be in-

stalled once.

Connecting the transmitter to the PC3.

Connect the USB lead to the PC or laptop and the

ﬁve-pin mini-USB socket on the back of the transmit-

ter, with the transmitter switched off. Check that the

USB lead is making solid contact.

4. Updating the mx-16 HoTT transmitter software

Start the program “Firmware_Upgrade_grStudio_Ver-

X.X.exe”, which is now stored in the folder you have

just named “HoTT_Software_VX” (or similar). (Note:

version 1.9, which is current at the time this manu-

al went to press, starts without being installed before-

hand.):

Open the “Controller Menu” and click on “Port Select”

in the “Upgrade” folder. Alternatively select the “Port

Select” entry under “Menu”:

Now select the correct COM port in the “Port select”

window, i.e. the port to which the USB interface is

connected. You can recognise this by the name “Sil-

icon Labs CP210x USB to UART Bridge” in the “De-

vice Name” column. In the screen-shot above this

would be the “COM 3” port.

Now call up the “Firmware Upgrade” option in the

“Transmitter” folder under “Controller Menu”. Alter-

natively select the “Firmware Upgrade” entry under

“Menu”:

When you have called up the program, you will see

the number “1” ﬂashing red in the numeric row 1 … 7

at the top of the window, indicating that the program

is currently operating at “[Process Step] 1”.

In each case the meaning of the currently ﬂashing

step is indicated immediately below the numeric row:

For example, at Step 1: “Connect USB lead to PC

and transmitter” and “Press File Browse button and

select Update ﬁle”, as shown here.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info