Bedienungsanleitung Graupner MX-16 HoTT (Seite 171 von 200) (Englisch)

467107

171

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

171

Programming example - ﬁxed-wing model

trv

free

+100%

free

In the third column you can adjust servo travel to suit the

speed controller you are using; alternatively you could

use the “Servo travel” column in the …

“Servo settings” menu (page 92).

r ev cent

trav

100%

The last stage is to check the settings, so move from

the basic display to “Servo display” by simultaneously

touching the  buttons of the left-hand touch-key: in

the switch’s “OFF” position, the control channel you have

selected - in our example this is channel “8” - should be

at -100%, and at the “full-throttle” setting at +100%.

Example 3

Using one of the three-position switches SW 4/5 or

6/7

This variant implements a three-stage solution for

switching an electric motor on and off, and also results

in an “abrupt “ motor start-up … unless the speed con-

troller you are using features what is known as a “soft

start” function.

At the receiving end you need a suitable speed controller.

Example 2

Using a two-position switch, SW 2, 3 or 8

This variant implements a pure ON / OFF function, and

results in the motor starting “abruptly” … unless the

speed controller you are using features what is known

as a “soft start” function.

At the receiving end you need either a simple electronic

switch or - if you want a smoother motor start - a suit-

able speed controller.

The settings for this arrangement are entered in the …

“Transmitter control settings” menu (page 94)

First check which receiver socket (5 or higher) is avail-

able for connection to your speed controller. If you have

assigned two aileron servos in the “Base settings”

menu, and if you have not connected any other auxiliary

function, then this would be channel 6; if your model

features two aileron servos and two ﬂap servos, then

channel 8 would be available for connecting the speed

controller; the latter option is the one we wish to use in

this example.

First set the selected switch to the “OFF” position, then

use the arrow buttons  of the left or right-hand

touch-key to select the desired line in the menu. Touch

the central SET button of the right-hand touch-key to

activate “Switch / transmitter control assignment”, then

move the selected switch from the “OFF” position to

the “ON” position. The highlighted ﬁeld now shows the

switch number together with a symbol which indicates

the direction of switching:

First check which receiver socket (5 or higher) is avail-

able to connect your speed controller. If you have as-

signed two aileron servos in the “Base settings” menu,

and if you have not connected any other auxiliary func-

tion, then this would be channel 6; if your model features

two aileron servos and two ﬂap servos, then channel 8

would be available for connecting the speed controller;

the latter option is the one we will use in this example.

Move to the …

“Transmitter control settings” menu (page 94)

… and use the arrow buttons  of the left or right-

hand touch-key to select the desired line. Brieﬂy press

the central SET button of the right-hand touch-key to

activate “Switch / transmitter control assignment”. Move

the selected three-position switch; the highlighted ﬁeld

now shows the number of this transmitter control, for

example “Transmitter control 9”.

trv

ctrl 9

free

+100%

free

In the third column you can adjust servo travel to suit the

speed controller you are using; alternatively you could

use the “Servo travel” column in the …

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 171

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info