Bedienungsanleitung Jablotron JA-80K (Seite 8 von 22) (Englisch)

554835

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Installation manual: Oasis security system JA-80K - 8 - MKE51801

minutes so it is impossible to combine multiple control panels

in one UC or AC receiver.

12. Control panel programming

The most convenient way to program the system is to use a

PC running Comlink software. The system can however also be

programmed by keying in the sequences in section 12.1.

• The system should be in Service mode (if not, enter the

following with the system unset: “∗0 Service code” – the

factory default is 8080)

• Enter the appropriate programming sequences – see the

following description (an unfinished sequence can be escaped

from by pressing the # key),

• To exit Service Mode press the # key.

12.1. Control panel programming sequences

Function Sequence Options

Factory

default

Notes

Entering enrollment mode

One wireless device (detector, keypad, key fob, siren or sub

control panel) can be enrolled to each address from 01 to 50.

The system offers vacant addresses one by one, if all

addresses are occupied no devices can be enrolled.

A device enrolled to address 01 or 02 disables the

corresponding hard-wired input 01 or 02.

In addition to enrollment mode, devices can also be enrolled

by keying in their production codes (see 12.42).

Keys:

up/down arrows = address

scrolling

holding 2= erases the displayed

address

holding 4 = erases all addresses

# = exiting enrollment mode

nothing

• devices enroll by

connecting their

power (battery),

keyfobs also by

pressing & holding a

pair of their buttons

• an occupied address

is indicated by the A

indicator being lit

• enrolling a device to

a new address will

move it there

Exit delay time 20x

x = 1 to 9 (x10 s =10 to 90 s) 30s

Entrance delay time 21x

x = 1 to 9 (x 5 s = 5 to 45 s) 20s

if a final door detector

is used, then x is

multiplied by 30s

instead (i.e. from 30

to 270s)

Alarm duration time 22x

x = 1 to 8 (min.), 9=15min 4 min. 0=10s (for testing)

PGX function 23x

on/off

(∗80/∗81)

PGY function 24x

x in an unsplit system:

0 - whole system set (ABC) =

PG on

1 - any system part set = PG on

2 - AB set (not C) = PG on

3 - Fire alarm = PG on

4 - Panic alarm = PG on

5 - Any alarm = PG on

6 - AC dropout = PG on

7 - PG on/off (by ∗80 /∗81 for

PGX and ∗90/∗91 for PGY)

8 – Single 2 s pulse (keys ∗8=X,

∗9=Y)

any

system

part set

x in a split system

0 - alarm A = PG on

1 - alarm B = PG on

2 - entrance delay A =

= PG on

3 - entrance delay B =

PG on

4 - A set = X on, B set

= Y on

5 - A panic = X on, B

panic = Y on

6 - Fire = X on, AC

dropout = Y on.

7 - PG on/off (by ∗80

/∗81for PGX and

∗90/∗91 for PGY)

8 – Single 2 s pulse

(keys ∗8=X, ∗9=Y)

Enablement of telephone number changes in

maintenance mode

25x

251 = YES 250 = NO NO see communicator

Radio interference indication 26x

261 = YES 260 = NO NO 30s or longer

Radio communication supervision 27x

271 = YES 270 = NO NO

RESET enabled 28x

281 = YES 280 = NO YES

Master control panel enrollment to a sub control

panel for setting (arming) control

290

The sequence triggers

enrollment.

(Un)setting the master control

panel will (un)set the sub control p.

The sub c. panel must be in

enrollment mode.

Master code reset 291

Returns master code to 1234

It has no effect on other codes and

it is recorded in the control panel

memory

Measuring signal strength 298

Activates measurement arrow keys scroll addresses,

# halts measurement.

Enrolling the control panel to UC, AC or a sub

control panel

299

The sequence triggers

enrollment.

see 12.10

Setting (arming) without an access code 30x

301 = YES 300 = NO YES by keying: A, B, ABC,

∗1, ∗2, ∗3, ∗4

Triggered detector indication

by text on the keypad display

31x

311 = YES 310 = NO YES

allows the display of

open windows &

doors,

to view details press ?

Confirmation of intruder alarms

In this mode, the triggering of an intruder detector in a set

(armed) section will only be recorded to the memory as an

unconfirmed alarm and if then followed by the activation of any

32x

321 = YES 320 = NO

An alarm can be

confirmed by any

other intruder detector

in any section which

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron JA-80K Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jablotron JA-80K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info