Bedienungsanleitung Kenwood TH-F7E (Seite 29 von 64) (Englisch)

511233

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

7 SCAN

MEMORY SCAN

Memory Scan monitors all memory channels in which

you have stored frequencies (All-Channel Scan) or

only a desired group of memory channels (Group

Scan).

ALL-CHANNEL SCAN

The transceiver scans all of the memory channels in

which you have stored frequencies.

1 Press [MR] (1 s).

• Scan starts from the last memory channel

number and ascends up through the channel

numbers (default). Turn the Tuning control or

press [ ]/ [ ] to change the scanning direction.

• To jump to a desired channel while scanning,

quickly turn the Tuning control.

2 To stop the All-Channel Scan, press [MR] or

[PTT].

Note:

◆

You must have 2 or more memory channels that contain the data,

excluding the special function memory channels.

◆

If “CURRENT BAND” is selected for Menu No. 3 (MR METHOD),

it scans only Memory channels that have the same frequency

band data.

◆

The transceiver stops scanning in all modes when it detects a

signal.

GROUP SCAN

In order to easily manage all 400 memory channels,

they are divided into 8 groups {page 18}. For the

purpose of Group Scan, you can select a particular

memory group to be scanned, depending on the

situation. Using the Memory Group Link function

{below}, you can scan all the linked memory groups.

1 Press [MR].

2 Turn the Tuning control or press [ ]/ [ ] to select

a memory channel in the group you want to scan.

For example, if you want to scan the group 0

memory channels, recall memory channel 12

(group 0 contains memory channels 0 ~ 49).

3 Press [MHz] (1 s).

• The memory channels within the selected

group are scanned.

• If the group is linked to other groups {below},

all the linked groups are also scanned.

4 To stop the Group Scan, press [MHz] or [PTT].

Note:

◆

You must have 2 or more memory channels that contain the data,

excluding the special function memory channels.

◆

The Group Scan scans all available memory channels,

regardless of Menu No. 3 (MR METHOD) selection {page 16}.

◆

The transceiver stops scanning in all modes when it detects a

signal.

■ Memory Group Link

Although the 400 memory channels are divided

into 8 groups {page 18}, you may sometimes want

to scan two or more groups. In this case, use the

Memory Group Link function.

1 Press [MNU] to enter Menu mode.

2 Turn the Tuning control or press [ ]/ [ ] to

select Menu No. 2 (M.GRP LINK).

3 Press [ ] or [MNU].

• The memory group numbers appear.

4 Move the cursor using [ ]/ [ ], then turn the

Tuning control or press [ ]/ [ ] to select or

deselect the group to be linked.

• Linked groups appear at the bottom of the

display (in the example below, groups 0, 1,

3 and 5 are linked).

5 Press [ ] or [MNU] to store the setting.

Otherwise, press [ ] or [PTT] to cancel.

• You can press [MONI] to cancel the all links

at once.

• You can also press [0] ~ [7] to select or

deselect the group to be linked.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TH-F7E Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TH-F7E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info