Bedienungsanleitung Korg microKORG S (Seite 55 von 73) (Englisch)

707422

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

22. MIDI

MIDI CH [1...16]

Specifies the MIDI channel.

When you wish to transmit pro-

gram changes or system exclusive

messages via MIDI, set the global

MIDI channel to match the MIDI

channel of the connected MIDI de-

vice.

LOCAL [OFF, ON]

Switch the local on/off setting.

OFF ( ):

With this setting, controllers such as

the keyboard and modulation

wheel will be internally discon-

nected from the tone generator sec-

tion.

This setting prevents notes from

being sounded in duplicate when a

sequencer is connected and the per-

formance data is echoed back from

the sequencer. (Echo back is when

the performance data transmitted

by playing the microKORG S is re-

transmitted back to the microKORG

S from the sequencer.)

ON ( ):

Select this setting when you are us-

ing the microKORG S by itself.

CLOCK [Internal, External, Auto]

Specifies how the microKORG S

will synchronize with a connected

external MIDI device (sequencer,

rhythm machine, etc.). If the LFO 1/

2 or DELAY "TEMPO SYNC" is ON,

the LFO rate and delay time will

also synchronize in the same way

as the arpeggiator.

POSITION [Post KBD, Pre TG]

Specifies the internal MIDI IN/

OUT routing within the micro-

KORG S. This setting will affect the

way in which MIDI data is trans-

mitted and received, and how the

arpeggiator data is handled. (➚)

(➘)

Auto ( ):

The microKORG S will automati-

cally function using the External

setting if MIDI clock messages are

being received from an external

MIDI device connected to the MIDI

IN connector. Normally it will func-

tion using the Internal setting.

When making settings for syn-

chronizing external MIDI de-

vices, refer to the owner's manu-

als for the devices you are using.

Here you can make MIDI-related settings for the microKORG S.

Internal ( ):

The arpeggiator will be determined

by the internal clock (specified by

"TEMPO"). Select this setting if you

are using the microKORG S by it-

self, or if you are using the

microKORG S as the master (con-

trolling device) so that an external

MIDI device will synchronize to the

MIDI clock messages from the

microKORG S.

External ( ):

The microKORG S's arpeggiator

will synchronize to the MIDI clock

messages received from an external

MIDI device connected to the MIDI

IN connector. (➚)

(➘)

Post KBD ( ):

In this position, incoming MIDI

data will be sent to the timbres

without being affected by the glo-

bal or front paneltranspose controls,

and will not trigger the arpeggiator.

Data produced by the keyboard will

be converted according to the inter-

nal settings, routed through the

arpeggiator (arpeggiator notes are

sent as MIDI data), and then sent

to the MIDI OUT connector.

(➝Figure 22-1)

Pre TG ( ):

Incoming MIDI data will be affected

by by the global settings, and will

act as trigger notes for the

arpeggiator. Data produced by the

keyboard will be sent to the MIDI

OUT connector without being af-

fected by any setting other than

OCTAVE SHIFT (arpeggiator notes

are NOT sent via MIDI). (➝Figure

22-2)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg microKORG S Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg microKORG S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info