Bedienungsanleitung Marmitek RFIX35 (Seite 8 von 11) (Englisch, Holländisch)

494328

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Single letter code receiving mode

If the letter code of the RFIX35 is programmed to any letter

code ("

A" to "O") the interface will only receive and forward the

programmed letter code. The remote control should be

programmed to the same letter code as the RFIX35.

All letter code receiving mode

If the letter code of the RFIX35 is programmed to letter code "P"

the interface will forward the programmed letter code in the

remote control. Independently which letter code is programmed

into the remote control( "

A" to "P"). The RFIX35 will receive all

letter codes and forward the received commands whenever

programmed into the remote control.

Programming of the RFIX35

Programming mode

In the programming mode the RFIX35 can be programmed to

receive only one user defined letter code (= select one lettercode

from A to O) or to receive all letter codes (A to P). When only one

letter code is programmed, the RFIX35 will only receive instructions

from remote controls within the receiving reach of the RFIX35

programmed on the same letter code. If for example the RFIX35 is

programmed on letter code B, the remote control also has to be

programmed on letter code B.

Security learn mode

In the security learn up to 8 RF-secured remote controls can be

linked to the RFIX35. Once the RFIX35 is programmed to function in

RF-secured mode, the RFIX35 will only accept RF-instructions from

linked remote controls. RF-instructions from other remote controls

within the receiving reach of the RFIX35 will be ignored. In this

mode you can also clear the memory of the RFIX35. All remote

controls linked to the RFIX35 will then be deleted. In this mode you

can also program the standard* receiving mode (non-secured)

whenever you have programmed the RF-secured mode previously.

Operation mode

In operation mode the RFIX35 will receive RF instructions from

remote controls and transpose them into Marmitek X-10 commands

on the power line.

*) Default is standard mode programmed to letter code A.

Programming

the letter code

Send a setup

command (letter

and number code)

(2x)

Press button

3 - 6 s

Press button

6 - 12 s

Press button

> 9 s

LED continuous ON

Shortly press

program switch

or wait 60 s

Letter code

programmed

LED flashes

Security

learn mode

Send security code

with remote control

(RF-secured)

Optional: clear memory

LED short blinks

Operation mode

LED OFF

Result:

secured mode

LED OFF

Memory

full

Code accepted Code NOT accepted

LED 2 s ON

Memory cleared

Result:

standard mode

1 2

Programming the RFIX35 (cont'd.)

Programming the letter code for the RFIX35

Activate the programming mode by keeping the programming

switch pressed for 3 to 6 seconds. The LED will now lit.

Send the setup command twice (letter code and number code),

through the power line by using e.g. Programming Unit

(PRU256), Marmitek X-10 Home Control Box or other X-10

compatible transmitters. The LED will blink twice after receipt of

two identical setup commands (Address). Letter code "

A" to "P"

may be programmed. For example, to program letter code B,

send B01 twice.

Press the programming switch in with a

pointed object.

Receive all letter codes

To receive all letter codes ("A" to "P") please program the RFIX35

on letter code "

P".

The LED will blink twice after receiving two identical setup

commands (Address) in the program mode.

CHOICE CHOOSE ACTION RESULT

Address Setup Command LED flashes

SINGLE A01…016 2 x Address 2 x

ALL P1…P16 2 x Address 2 x

Ending the programming mode

Shortly press the programming button mode or just wait

60 seconds to return to the operation mode.

Note: It is not possible to program the RFIX35 with

a remote control only. To program the IRIX35 with

the remote control an additional remote control

receiver is required to send the setup commands

over the power line to the RFIX35.

Programming the RFIX35 (cont'd.)

Press the programming switch in with a pointed object.

Programming the RFIX35 to the RF-secured mode

Activate the RF-secured programming mode by keeping the

programming switch pressed for 6 seconds. The LED will now

give quick short blinks.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marmitek RFIX35 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info