Bedienungsanleitung Microlife IR 210 (Seite 5 von 81) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

773464

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

4IR 210 EN

2. Press the M-button

to either turn the beeper on or off. The beeper

is activated when the beeper icon

is shown without a cross.

When the beeper setting has been chosen, press the

START/IO button 6 to enter the «ready for measuring»

mode; otherwise the device automatically switches to ready

for measuring after 10 seconds 9.

6. Changing between Body and Object Mode

1. Press the START/IO button 6. The display 2 is activated to

show all segments for 1 second.

2. The default mode is body mode AL. Press the MODE button 4

to switch to object mode AM. For switching back to body mode,

press the MODE button again.

7. Directions for Use

Measuring in body mode

Important:

Before each measurement, fit a new undamaged probe

cover

on the measuring sensor

. Failure to do so will result in

incorrect temperature measurements. How to correctly fit a new

probe cover

is pictured at the beginning of this instruction.

1. Press the START/IO button 6. The display 2 is activated to

show all segments for 1 second.

2. When the «°C» or «°F» icon is flashing, a beep sound is heard

and the thermometer is ready for measuring 9.

3. The probe LED light is activated and will keep flashing.

4. Straighten the ear canal by pulling the ear up and back to give

a clear view of the eardrum.

For children under 1 year; pull the ear straight back.

For children of 1 year to adult; pull the ear up and back.

Also refer to the short instructions at the front.

5. While gently pulling the ear, insert the probe snugly into the ear

canal.

6. The probe LED light will stop flashing (stays illuminated) and

«good» will be displayed on the LCD, when the measuring

sensor detects an appropriate position.

Immediately

press the START/IO button

. Release the button

and wait for the beep sound. This indicates the end of the

measurement.

8. Remove the thermometer from the ear canal. The display shows

the measured temperature

9. Replace the probe cover

before starting a new measurement.

10.For the next measurement wait until the «°C»/«°F» icon is

flashing and follow steps 5-7 above.

11.Press and hold the START/IO button 6 for 3 seconds to turn

off the device; otherwise the device will automatically switch off

after approx. 60 seconds.

Measuring in object mode

Important: Remove the probe cover before each measurement in

object mode. Failure to do so will result in incorrect temperature

measurements.

1. Press the START/IO button 6. The display 2 is activated to

show all segments for 1 second.

2. Press the MODE button 4 to switch to object mode.

3. Aim the thermometer at the center of the object you want to

measure with a distance of no more than 5 cm. Press the

START/IO button 6. After 1 second a long beep will verify the

completion of measurement.

4. Read the recorded temperature from the LCD display.

5. For the next measurement wait until the «°C»/«°F» icon is

flashing and follow steps 3-4 above.

NOTE:

Patients and thermometer should stay in similar room

condition for at least 30 minutes.

To ensure accurate readings, wait at least 30 sec. after 3-5

continuous measurements.

It is essential that a new undamaged probe cover CK is

used for each measurement. Therefore, this device reminds

the user to take off the used probe cover when turning off the

device. The «probe cover» icon BN is displayed and the probe

LED light will flash for 3 seconds. For cleaning, follow the

instructions in the «Cleaning and Disinfecting» section.



After cleaning the measuring sensor

with alcohol, wait 5

minutes before taking the next measurement

, in order to allow

the thermometer to reach its operating reference temperature.

10 short beeps and a red LCD backlight alert the patient that he/

she may have a temperature equal to or higher than 37.5 °C.



For an infant, it is best to have the child lying flat with his/her head

sideways so the ear is facing upwards. For an older child or adult,

it is best to stand behind and slightly to the side of the patient.

Always take the temperature in the same ear, since the temper-

ature readings may be different from ear to ear.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife IR 210 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info