Bedienungsanleitung Midas M32 (Seite 40 von 61) (Englisch)

658461

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

40 M32 DIGITAL CONSOLE User Manual

There are four standard graphic EQs that provide 31 bands of adjustment

between 20 Hz and 20 kHz. A master volume slider compensates for changes

in volume caused by the EQ. A maximum boost or cut of 15 dB is available for

eachband.

The TruEQ incorporates a special algorithm that compensates for the gain

adjustment overlapping eect that adjacent frequency bands have on one

another. On a standard EQ, when neighbouring bands are boosted together,

theresulting eect is magnied beyond what is visible from the positioning of

the sliders.

This compensated EQ will produce an adjustment that is identical to the actual

positioning of the sliders.

Graphic EQ without frequency response correction.

Graphic EQ with frequency response correction.

Dual DeEsser / Stereo DeEsser

De-essing is an audio eect designed to reduce the amount of excessive sibilance

in an audio signal, usually when dealing with the human voice. The Dual DeEsser

accurately and seamlessly removes sibilance from audio tracks.

The Lo-Band and Hi-Band controls select which portion of the audio spectrum

is aected by the DeEsser on each channel. By increasing the amount of

reduction, the level to which the de-essing aects the input signal can be

controlled. By pressing the rst and third push encoders, the eect can be

targeted specically at male or female voices.

With the Stereo DeEsser, toggle between Stereo and M/S modes by pressing the

fth push encoder.

Stereo Xtec EQ1 / Dual Xtec EQ1

Virtually indescribable, recording engineers claim the Pultec EQP-1a to be the

“secret sauce” of sound enhancement. We analysed this classic to the core and

created an exact physical model that reproduces the multi-faceted sound in

painstaking detail. Even the transformers and tube output stage have been

faithfully modelled. Inspired by Pultec EQP-1a.

LO FREQ determines the curve on which the left hand LO BOOST and LO ATT

controls are eective. These controls can be used to either boost or attenuate the

signal as required. HI FREQ, HI BOOST and HI ATT perform the same function,

but for the higher frequencies. HI BANDWIDTH adjusts the width of the high-

frequency boost curves.

Stereo Xtec EQ5 / Dual Xtec EQ5

Pultec simply wrote the book on passive equalisation. By digitally “rebuilding”

every aspect of the original Pultec classic, we captured the very essence in our

parametric equaliser XTEC EQ5. Our digital re-incarnation is based on the original

model and authentically emulates the smooth character of the its rather unique

components. Inspired by Pultec MEQ5.

LO FREQ, MID FREQ and HI FREQ all dictate at which frequencies the LO BOOST,

MID CUT and HI BOOST push encoders work.

For all of the Xtec EQs, the TRANSFORMER function can be engaged to switch

the Transformer emulation on or o, giving a warmer sound. GAIN determines

how much of the source signal passes through the eect, and ACTIVE toggles the

EQ in or out of the signal path.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas M32 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info